latonita/esphome-ina228

Stars
8
Rank 2,099,232 (Top 42 %)
Language
C++
Created 11 months ago
Updated 5 months ago

latonita/esphome-ina228

latonita

There are no reviews yet. Be the first to send feedback to the community and the maintainers!

Esphome component for digital power monitors INA228, INA229, INA237, INA238, INA239

arduino-canbus-monitor

Can bus monitoring tool based on arduino and can bus shield. Implements CAN ASCII/SLCAN protocol compatible with Lawicel CAN232/CANUSB. Can be used for monitoring low speed CAN (interior can bus of most cars, less than 500kbps). For higher speeds serial port can become a bottleneck in case data density is high.

tenda-reverse

Reverse engineering, getting root access to Tenda MW6 wifi mesh router

jeep-canbus

Projects around CAN BUS in Chrysler Jeep - VES enabler, other small features

painlessMeshMqttGateway

MQTT<>painlessMesh gateway. Routes messages between mesh IoT network and ethernet. This is mirror of repo on gitlab.

esp8266-mqtt-pulsecounter

Simple pulse counter

SoftwareStepDirUnipolarDriver

Arduino-based step/dir driver for unipolar motors connected via ULN2003 or similar circuits

esphome-st7567s-display

ST7567S (I2C) display component for Esphome

esphome-energomera-iec

Компонент EspHome для счетчиков Энергомера CE102M, CE301, CE303 (IEC/МЭК/ГОСТ 61107)

esphome-iec61107-meter

Electricity meter IEC61107 - Energomera CE102M, CE301, CE303

esphome-veml7700

xpenology-mods

kicad-various-shematics

Various projects schematics and pcbs

esphome-ltr303

LTR-303, LTR-329, LTR-553, LTR-556, LTR-559, LTR-659 component for esphome