latonita/esphome-energomera-iec

Stars
3
Rank 3,963,521 (Top 79 %)
Language
C++
License
MIT License
Created 8 months ago
Updated 7 months ago

latonita/esphome-energomera-iec

latonita

There are no reviews yet. Be the first to send feedback to the community and the maintainers!

Компонент EspHome для счетчиков Энергомера CE102M, CE301, CE303 (IEC/МЭК/ГОСТ 61107)

arduino-canbus-monitor

Can bus monitoring tool based on arduino and can bus shield. Implements CAN ASCII/SLCAN protocol compatible with Lawicel CAN232/CANUSB. Can be used for monitoring low speed CAN (interior can bus of most cars, less than 500kbps). For higher speeds serial port can become a bottleneck in case data density is high.

tenda-reverse

Reverse engineering, getting root access to Tenda MW6 wifi mesh router

jeep-canbus

Projects around CAN BUS in Chrysler Jeep - VES enabler, other small features

painlessMeshMqttGateway

MQTT<>painlessMesh gateway. Routes messages between mesh IoT network and ethernet. This is mirror of repo on gitlab.

esp8266-mqtt-pulsecounter

Simple pulse counter

esphome-ina228

Esphome component for digital power monitors INA228, INA229, INA237, INA238, INA239

SoftwareStepDirUnipolarDriver

Arduino-based step/dir driver for unipolar motors connected via ULN2003 or similar circuits

esphome-st7567s-display

ST7567S (I2C) display component for Esphome

esphome-iec61107-meter

Electricity meter IEC61107 - Energomera CE102M, CE301, CE303

esphome-veml7700

xpenology-mods

kicad-various-shematics

Various projects schematics and pcbs

esphome-ltr303

LTR-303, LTR-329, LTR-553, LTR-556, LTR-559, LTR-659 component for esphome