Snzip, a compression/decompression tool based on snappy.
What is snzip.
Snzip is one of command line tools using snappy. This supports several file formats; framing-format, old framing-format, hadoop-snappy format, raw format and obsolete three formats used by snzip, snappy-java and snappy-in-java before official framing-format was defined. The default format is framing-format.
Notable Changes
The default format was changed to framing-format in 1.0.0.
Set --with-default-format=snzip as a configure option to use obsolete snzip
format as the default format as before.
Installation
Install from a tar-ball
Download snzip-1.0.5.tar.gz from https://github.com/kubo/snzip/releases, uncompress and untar it, and run configure.
tar xvfz snzip-1.0.5.tar.gz
cd snzip-1.0.5
./configure
make
make install
If you didn't install snappy under /usr or /usr/local, you need to specify
the location by --with-snappy as follows.
# install snzip
tar xvfz snzip-1.0.5.tar.gz
cd snzip-1.0.5
./configure --with-snappy=/xxx/yyy/
make
make install
When both dynamic and static snappy libraries are available, the former
is used by default. The compiled snzip depends on libsnappy.so.
When --with-static-snappy is passed as a configure option, the latter
is used. The compiled snzip includes snappy library.
Note: --with-static-snappy isn't available on some platforms.
You can use --with-default-format to change the default compression format.
./configure --with-default-format=snzip
Install as a rpm package
We don't provide rpm packages. You need to download snzip-1.0.5.tar.gz from https://github.com/kubo/snzip/releases, create a rpm package as follows and install it.
# The rpm package will be created under $HOME/rpmbuild/RPMS.
rpmbuild -tb snzip-1.0.5.tar.gz
Install from the latest source
To use source code in the github repository.
git clone git://github.com/kubo/snzip.git
cd snzip
./autogen.sh
./configure
make
make install
Install a Windows package.
Download snzip-1.0.5-win32.zip or snzip-1.0.5-win64.zip from
https://github.com/kubo/snzip/releases and copy snzip.exe and snunzip.exe
to a directory in the PATH environment variable.
Usage
To compress file.tar:
snzip file.tar
Compressed file name is file.tar.sz and the original file is deleted.
The file attributes such as timestamp, mode and permissions are not changed
as possible as it can.
The compressed file's format is framing-format. You need to add an option -t snappy-java or
-t snappy-in-java to use other formats.
snzip -t snappy-java file.tar
or
snzip -t snappy-in-java file.tar
To compress file.tar and output to standard out.
snzip -c file.tar > file.tar.sz
or
cat file.tar | snzip > file.tar.sz
You need to add an option -t [format-name] to use formats except framing-format.
To create a new tar file and compress it.
tar cf - files-to-be-archived | snzip > archive.tar.sz
To uncompress file.tar.sz:
snzip -d file.tar.sz
or
snunzip file.tar.sz
Uncompressed file name is file.tar and the original file is deleted.
The file attributes such as timestamp, mode and permissions are not changed
as possible as it can.
If the program name includes un such as snunzip, it acts as -d is set.
The file format is automatically determined from the file header. However it doesn't work for some file formats such as raw and Apple iWork .iwa.
To uncompress file.tar.sz and output to standard out.
snzip -dc file.tar.sz > file.tar
snunzip -c file.tar.sz > file.tar
snzcat file.tar.sz > file.tar
cat file.tar.sz | snzcat > file.tar
If the program name includes cat such as snzcat, it acts as -dc is set.
To uncompress a tar file and extract it.
snzip -dc archive.tar.sz | tar xf -
Raw format
Raw format is native format of snappy. Unlike other formats, there are a few limitations: (1) The total data length before compression must be known on compression. (2) Automatic file format detection doesn't work on uncompression. (3) The raw format support is enabled only when snzip is compiled for snappy 1.1.3 or upper.
To compress file.tar as raw format:
snzip -t raw file.tar
or
snzip -t raw < file.tar > file.tar.raw
In these examples, snzip uses a file descriptor, which directly opens
the file.tar file, and gets the file length to be compressed.
However the following command doesn't work.
cat file.tar | snzip -t raw > file.tar.raw
It uses a pipe. snzip cannot get the total length before compression.
The total length must be specified by the -s option in this case.
cat file.tar | snzip -t raw -s "size of file.tar" > file.tar.raw
To uncompress file.tar.sz compressed as raw format
snzip -t raw -d file.tar.sz
or
snunzip -t raw file.tar.sz
You need to set the -t raw option to tell snzip the format of the
file to be uncompressed.
Hadoop-snappy format
Hadoop-snappy format is one of the compression formats used in Hadoop. It uses its own framing format as follows:
- A compressed file consists of one or more blocks.
- A block consists of uncompressed length (big endian 4 byte integer) and one or more subblocks.
- A subblock consists of compressed length (big endian 4 byte integer) and raw compressed data.
To compress a file as hadoop-snappy format
snzip -t hadoop-snappy file_name
The default block size used by snzip for hadoop-snappy format is 256k.
It is same with the default value of the io.compression.codec.snappy.buffersize
parameter. If the block size used by snzip is larger than the parameter,
you would get an InternalError Could not decompress data. Buffer length is too small
while hadoop is reading a file compressed by snzip. You need to change the block
size by the -b option as follows if you get the error.
# if io.compression.codec.snappy.buffersize is 32768
snzip -t hadoop-snappy -b 32768 file_name_to_be_compressed
To uncompress a file compressed as haddoop-snappy format
snzip -d compressed_file.snappy
The file format is guessed by the first 8 bytes of the file.
Apple iWork .iwa format
Apple iWork .iwa format is a file format used by Apple iWork. The format was demystified here. Basically the .iwa format consists of a Protobuf stream compressed by Snappy.
Snzip uncompresses .iwa files to Protbuf streams and compresses Protobuf streams
to .iwa files. You need to set -t iwa on compression and uncompression to
specify the file format.
SNZ File format
Note: This is obsolete format. The default format was changed to framing-format.
The first three bytes are magic characters 'SNZ'.
The fourth byte is the file format version. It is 0x01.
The fifth byte is the order of the block size. The input data is divided into fixed-length blocks and each block is compressed by snappy. When it is 16 (default value), the block size is 16th power of 2; 64 kilobytes.
The rest is pairs of a compressed data length and a compressed data block
The compressed data length is encoded as snappy::Varint::Encode32() does.
If the length is zero, it is the end of data.
Though the rest after the end of data is ignored for now, they may be continuously read as a next compressed file as gzip does.
Note that the uncompressed length of each compressed data block must be less than or equal to the block size specified by the fifth byte.
License
2-clause BSD-style license.