Kadena Public Blockchain

Kadena is a fast, secure, and scalable blockchain using the Chainweb consensus protocol. Chainweb is a braided, parallelized Proof Of Work consensus mechanism that improves throughput and scalability in executing transactions on the blockchain while maintaining the security and integrity found in Bitcoin.

Read our whitepapers:

For additional information, press, and development inquires, please refer to the Kadena website

Kadena Docs Site
Installing Chainweb
Bootstrap Nodes
Configuring, running, and monitoring the health of a Chainweb Node
Mining for a Chainweb Network
Chainweb Design
- Component Structure Details
- Architecture Overview

Docs

The Kadena Docs site, which can be found here serves as a source of information about Kadena. You can find information about how to interact with the public chain, including how to get keys, view network activity, explore blocks, etc. here.

If you have additions or comments, please submit a pull request or raise an issue - the GitHub project can be found here

Installing Chainweb

Minimal recommended hardware requirements for nodes are:

2 CPU cores
4 GB of RAM
250 GB SSD or fast HDD
Public IP address

If the node is also used as API server for Pact or mining, rosetta, chainweb-data: 4 CPU cores and 8GB of RAM.

Docker (all batteries included)

A docker image is available from here and can be used with the following commands:

# Initialize the database (optional, but avoids several hours of initial db synchronization)
docker run -ti --rm -v chainweb-db:/root/.local/share/chainweb-node/mainnet01/0/ kadena/chainweb-node /chainweb/initialize-db.sh

# Run a chainweb-node in Kadena's mainnet
docker run -d -p 443:443 -v chainweb-db:target=/root/.local/share/chainweb-node/mainnet01/0/ kadena/chainweb-node

Further details can be found in the README of the docker repository.

Docker (bare metal)

A docker image with just a bare chainweb-node binary and its dependencies is available at ghcr.io/kadena-io/chainweb-node/ubuntu:latest. It is up to the user to setup and manage the database and configure the node to their needs.

docker run -p 1789:1789 -p 80:80 --entrypoint=/chainweb/chainweb-node ghcr.io/kadena-io/chainweb-node/ubuntu:latest --help
docker run -p 1789:1789 -p 80:80 --entrypoint=/chainweb/chainweb-node ghcr.io/kadena-io/chainweb-node/ubuntu:latest --print-config

Examples for running docker compose setups for chainweb-node for different usage scenarios can be found in this repository.

Ubuntu Linux

The following packages must be installed the on the host system:

ubuntu-20.04:

apt-get install ca-certificates libgmp10 libssl1.1 libsnappy1v5 zlib1g liblz4-1 libbz2-1.0 libgflags2.2 zstd

ubuntu-22.04:

apt-get install ca-certificates libgmp10 libssl1.1 libsnappy1v5 zlib1g liblz4-1 libbz2-1.0 libgflags2.2 zstd

Chainweb-node binaries for ubuntu-20.04 and ubuntu-22.04 can be found here.

Download the archive for your system and extract the binaries and place them into a directory from where they can be executed.

At this point, you are ready to run a Chainweb node

Building from Source

IMPORTANT NODE: We recommend the use of officially released chainweb-node binaries or docker images, which can be found in the release section of this repository. If you decide to build your own binaries, please make sure to only use officially released and tagged versions of the code. Those versions are extensively tested to ensure that they are compatible with all other nodes in the chainweb network. It is generally not safe to run arbitrary builds of the master branch in the Kadena mainnet.

Chainweb is a Haskell project. After cloning the code with git from this GitHub repository the chainweb-node application can be built as follows.

Building with Cabal

In order to build with cabal you have to install ghc-8.10.7 (Haskell compiler) and cabal >= 3.4 (Haskell build-tool)

Linux / Mac

You need to install the development versions of the following libraries: gflags, snappy, zlib, lz4, bz2, zstd.

On apt based distribution these can be installed as follows:

apt-get install ca-certificates libssl-dev libgmp-dev libsnappy-dev zlib1g-dev liblz4-dev libbz2-dev libgflags-dev libzstd-dev

To build a chainweb-node binary:

# Only necessary if you haven't done this recently.
cabal update

# Build the project.
#
# After this, a runnable binary can be found by running `cabal list-bin chainweb-node`.
cabal build

Building with Nix

Another way to build and run chainweb is to use the Nix package manager which has binary caching capabilities that allow you to download pre-built binaries for everything needed by Chainweb. For detailed instructions see our wiki.

When the build is finished, you can run chainweb with the following command:

./result/ghc/chainweb/bin/chainweb-node

Bootstrap Nodes

Bootstrap nodes are used by chainweb-nodes on startup in order to discover other nodes in the network. At least one of the bootstrap nodes must be trusted.

Chainweb node operators can configure additional bootstrap nodes by using the --known-peer-info command line option or in a configuration file. It is also possible to ignore the builtin bootstrap nodes by using the --enable-ignore-bootstrap-nodes option or the respective configuration file setting.

Bootstrap nodes must have public DNS names and a corresponding TLS certificate that is issued by a widely accepted CA (a minimum requirement is acceptance by the OpenSSL library).

Operators of bootstrap nodes are expected to guarantee long-term availability of the nodes. The list of builtin bootstrap nodes should be kept up-to-date and concise for each chainweb-node release.

If you like to have your node included as a bootstrap node please make a pull request that adds your node to P2P.BootstrapNodes module.

Current Testnet Bootstrap Nodes

us1.testnet.chainweb.com
us2.testnet.chainweb.com
eu1.testnet.chainweb.com
eu2.testnet.chainweb.com
ap1.testnet.chainweb.com
ap2.testnet.chainweb.com

Current Mainnet Bootstrap Nodes

All bootstrap nodes are running on port 443.

us-e1.chainweb.com
us-e2.chainweb.com
us-e3.chainweb.com
us-w1.chainweb.com
us-w2.chainweb.com
us-w3.chainweb.com
jp1.chainweb.com
jp2.chainweb.com
jp3.chainweb.com
fr1.chainweb.com
fr2.chainweb.com
fr3.chainweb.com

Configuring, running, and monitoring the health of a Chainweb Node

This section assumes you've installed the chainweb-node binary somewhere sensible, or otherwise have a simple way to refer to it. For running chainweb-node via docker, please see the instruction above in this document or visit our docker repository.

Note: Your node needs to be reachable from the public internet. You will have to perform Port Forwarding if your machine is behind a router (by default port 1789 is used by the node).

NOTE: When you start chainweb-node for the first time it creates a new empty database and start to synchronize and catch up with other nodes in the Kadena network. This process takes a long time -- several days. It is much faster (depending on hardware one to a few hours) to just synchronize the chain database or get a snapshot of it and only rebuild the pact databases from the chain-database. Please, consult the documentation of the docker images for chainweb-node about details how to obtain an initial chain database.

Run your node:

chainweb-node

The node will communicate with other nodes in a P2P network. By default it uses port 1789 for the P2P communication.

Node services are exposed via the service API, by default on port 1848. The service API includes /info, /health-check, Pact endpoints, Rosetta endpoints, the mining API endpoints, GET endpoints for on-chain data (headers, payloads, cuts), and an HTTP event stream of block header updates. Some of these are disabled by default (e.g. mining API, Rosetta, and header updates).

While the P2P endpoint must be directly available from the public internet, it is highly recommended to expose the service API only on a private network. When service API endpoints are made available publicly it is recommended to use a reverse proxy setup things like rate limiting, authentication, and CORS.

Configuration

No particular configuration is needed for running Chainweb node on the Kadena mainnet.

Use chainweb-node --help to show a help message that includes a brief description of all available command line options.

A complete configuration file with the default settings can be created with

chainweb-node --print-config > config.yaml

This file can then be edited in order to change configuration values.

The command chainweb-node --help also provides descriptions of these configuration values.

Given a configuration file or a set of command line options it is possible to print out only those configuration values that are different from their respective default:

chainweb-node --config-file=config.yaml --some-command-line-options --print-config-as=minimal

Monitoring the health of a Chainweb Node

The following outlines how you can check that your chainweb-node is healthy

chainweb-node should be running from the public IP address and a port that is open to the other Chainweb nodes.

If you're behind a NAT, it is VERY IMPORTANT that your network allows external nodes to connect to the node you are running.

$ chainweb-node --log-level <desired-log-level>

For production scenarios we recommend that you use log-level warn or error. For trouble shooting or improved monitoring you can also use info.

Once your node is running, go through the following checks to verify that you have a healthy node:

run the command in your terminal:

$ curl -sk "https://<public-ip>:<port>/chainweb/0.0/mainnet01/cut"

navigate to this website on your browser: https://yourPublicIp:port/chainweb/0.0/mainnet01/cut
check logs for whether services are started
check if the node is receiving cuts
look for errors in the logs
look for warnings in the logs

Usually, when a node is receiving and publishing cuts (i.e. block heights at every chain), it's working correctly.

The /cut endpoint will return the latest cut that your node has. It's possible that your node is falling behind, so make sure to compare its cut height with the cut heights of the bootstrap nodes. It's also possible that you are mining to a node that is catching up to the rest of the network. Before you start mining to a node, you SHOULD verify that this node has the most up-to-date cut.

You can get the cut height of any node by running the following:

$ curl -sk https://<bootstrap-node-url>/chainweb/0.0/mainnet01/cut | jq '.height'

Mine for a Chainweb Network

Successful mining on mainnet requires specialized hardware (ASIC). The setup for solo mining involves running a chainweb-node with a configuration that enables mining and a chainweb-mining-client that connects to the mining API of a chainweb-node and provides a Stratum API for the mining hardware (ASIC).

Detailed instructions for setting up all the infrastructure needed to start mining using docker compose can be found in the documentation of docker-compose-chainweb-node/mining-node.

For example, to set up a chainweb node for mining, see this section of the docker-compose file.

Detailed mining client instructions can be found in the documentation of chainweb-mining-client

Chainweb Design

Component Structure

The Chainweb package contains the following buildable components:

chainweb library: It provides the implementation for the different components of a chainweb-node.
chainweb-node: An application that runs a Chainweb node. It maintains copies of a number of chains from a given Chainweb instance. It provides interfaces (command-line and RPC) for directly interacting with the Chainweb or for implementing applications such as miners and transaction management tools.
chainweb-tests: A test suite for the Chainweb library and chainweb-node.
cwtool: A collection of tools that are helpful for maintaining, testing, and debugging Chainweb.
bench: a collection of benchmarks

kadena-io/chainweb-node

kadena-io

Reviews

Repository Details