johnboiles/BurnBabyBurn

Stars
2
Language Arduino
Created over 11 years ago
Updated over 11 years ago

johnboiles/BurnBabyBurn

johnboiles

There are no reviews yet. Be the first to send feedback to the community and the maintainers!

Tiny board for controlling a high-power logic-level n-channel MOSFET transistor. Useful for burning stuff (like nichrome wire). Can be used as a timed cut-off for high-altitude ballooning.

obs-mac-virtualcam

ARCHIVED! This plugin is officially a part of OBS as of version 26.1. See note below for info on upgrading. 🎉🎉🎉Creates a virtual webcam device from the output of OBS. Especially useful for streaming smooth, composited video into Zoom, Hangouts, Jitsi etc. Like CatxFish/obs-virtualcam but for macOS.

BaofengUV5R-TRRS

Tiny board that allows you to connect the Baofeng UV5R radio to a smartphone or other device that uses a TRRS connector for audio.

coremediaio-dal-minimal-example

Intended to be the most minimalistic example of a macOS CoreMediaIO DAL plugin.

esp-roomba-mqtt

ESP8266 MQTT Roomba controller (Useful for hooking up old Roombas to Home Assistant)

JBKinectHacks

A collection of sample projects and code snippets using OpenNI and the Kinect.

esphome-hdmi-cec

ESPHome component to send and receive HDMI-CEC messages.

JBDaylightOverlay

An overlay for MapKit that shows daylight for the current date and time.

esp-garage-opener

(DEPRECATED: Use ESPHome instead) Control your garage door over MQTT with Home Assistant.

hotspot_autologin

Script to automatically log into wifi hotspots that redirect to an agreement page before allowing access.

ARDroneSDK

Fork of Parrot's official ARDrone SDK

homeassistant-config

My Home Assistant and ESPHome configs

home-assistant-purpleair

Forked from https://gitlab.com/gibwar/home-assistant-purpleair

NMEAProxy

Tool for forwarding NMEA messages from TCP sockets and serial ports.

xcasset_exporter

Short script for exporting images in .xcassets bundles to individual image files.

pi-rtlsdr-igate-docker

Dockerfile for running an APRS IGate on a RaspberryPi with an attached RTL-SDR dongle

Helm-firmware

A data translator for your boat networks. Connects to SeaTalk, NMEA 0183, and USB.

trackuino

The Arduino APRS Tracker

Helm-hardware

A data translator for your boat networks. Connects to SeaTalk, NMEA 0183, and USB.

CocoaOpenNI

Sample project for using OpenNI in a Cocoa OSX app.

tinytrackuino

Small Trackuino-compatible board for transmitting APRS packets over 2m amateur radio.

rtl-433-docker-pi

Dockerfile and related SystemD unit file for running rtl_433 inside Docker on a Raspberry Pi.

Helm-ios

iOS app for controlling SeaTalk-based autopilots on boats.

esp-fan-controller

(DEPRECATED: Use ESPHome instead) MQTT fan controller with an ESP12 to drive a PWM input to a mosfet.

Dimlet

A portable, network-controlled light dimmer that can be controlled from an iOS application.

air-sensor

(DEPRECATED: Use ESPHome instead) Esp8266 Air Sensor (temp, humidity, co2, particulates) for reporting to Home-Assistant

replaycam

Simple webserver for Raspberry Pi that exposes an endpoint for saving the last n seconds of video from the Raspberry Pi Camera Module.

Steer

iOS app for driving a remote controlled car from an iPhone w/ IP camera FPV.

JohnBoiles-Eagle-Libraries

Custom Eagle Libraries

XcodeSnippets

A collection of XcodeSnippets I found useful

projects

Write-ups on things I've built

pi-oled-docker

A Dockerfile and Python script for driving a small OLED display from a Raspberry Pi.

esp-mqtt-irblaster

(DEPRECATED: Use ESPHome instead) ESP8266 MQTT IR Blaster. Useful for hooking up IR gear (TVs, ACs, sound bars) to Home Assistant (and probably other things).

pi-oled

Code for running a small OLED attached to a RaspberryPi to show some system stats. (Note: ChatGPT helped make this)

CupsPi

Raspberry Pi image builder for a CUPS print server

rtl-sdr-homekit

Project to bridge RF sensors to Apple Homekit using a rtl-sdr dongle.

IBMF-Font-Editor

stacks-ios

iOS SDK for the upcoming Stacks environment management tool.

KinectWings

Kinect controller for quadcopters.

scad-pegboard

OpenSCAD models for the pegboard on my walls.

OpenVSD

A small board and accompanying Arduino firmware that allows you to turn a normal diaphragm pump into a variable speed diaphragm pump.

scad-lego-stepper

Originally based on Thing 1674077 (by rainerunsinn I think) from Thingiverse