Plerd

Plerd is meant to be an ultralight blogging platform for Markdown fans that plays well with (but does not require) Dropbox.

It allows you to compose and maintain blog posts as easily as adding and modifying Markdown files in a single folder. Plerd creates an entirely static website based on the content of this one folder, automatically updating the site whenever this content changes.

Optional and experimental Plerd features add support for IndieWeb technologies, such as sending webmentions.

Purpose

Plerd allows a blogger to publish new posts to their blog simply by adding Markdown files to a designated blog-source directory. By mixing in Dropbox, this directory can live on their local machine. They can also update posts by updating said files, and unpublish posts by deleting or moving files from that same folder.

The generated website comprises a single directory containing only static files. These include one "permalink" HTML page for every post, a recent-posts front page, a single archive page (in the manner of Daring Fireball), and syndication documents in Atom and JSON Feed formats. All these are constructed from simple, customizable templates.

That's it! That's all Plerd does.

If you have the time and inclination, you may watch a 20-minute presentation about my reasons for creating Plerd.

Project status

Plerd is released and stable. It still has plenty of room for improvement, and I welcome community feedback and patch proposals, but it will continue to do what it does now, in more or less the same fashion, for the foreseeable future.

I reserve the right to add new features to it, but I will do my best not to break existing functionality when doing so. If you'd like to stay informed of Plerd changes, consider joining the plerd-announce mailing list.

Setup

Installation

First, make sure you have the cpanm program on your machine. It is likely available as "cpanminus" in your favorite package manager. (Or install it from source, through the instructions at http://cpanmin.us.)

Then, run this command:

cpanm Plerd

If you run into issues due to failing dependencies, you can try one of these instead:

cpanm --notest Plerd
# or
cpanm --force Plerd

Alternately, you can run these commands under `sudo` to install Plerd at the system level.

If everything installed as it should, then you should have the plerdall and plerdwatcher programs in your command path.

To install Plerd from source, set the current working directory to the same directory containing this README file, make sure you have cpanm as described above, and then do this:

cpanm --installdeps .
perl Makefile.PL
make
make install

Configuration

Run plerdall --init to create a new directory called plerd/ in your current working directory, populated with all the special files and directories that Plerd requires. This includes a sample config file in plerd/plerd.conf.

If you'd like the directory named something else or located somewhere else, you can provide it as an argument, e.g. plerdall --init=/some/other/location. See the plerdall man page for full details.

Here's the purpose of the subdirectories that plerdall --init creates:
- source: This will hold your blog's Markdown-based source files.
- templates: Holds your blog's templates. plerdall --init will place a full complement of sample templates in this directory for you.
- docroot: Will hold your blog's actual docroot, ready for serving up by the webserver software of your choice.
- conf: Holds your blog's configuration files. plerdall --init will place an example plerd.conf file in this directory for you.
- db: Will contain metadata about your blog's posts.
- run: Holds PID files and such.
- log: The plerdwatcher program will write logs here.
You can freely add other files or directories in this directory if you wish (a drafts folder, perhaps?). Plerd will happily ignore them.
Edit the plerd.conf file in the directory that you created in the previous step to best suit your needs. The file itself is extensively commented and self-documenting.

You can optionally move or copy the file to .plerd in your home directory. If you do, that new copy of the file becomes the default configuration file that Plerd's command-line programs will refer to.
As noted above, the templates directory that you created in the first step of this process contains sample templates that you can customize as much as you'd like. They are rendered using Template Toolkit. You can't change these template files' names, but you can add new sub-template files that the main temlates will invoke via the [% INCLUDE %] directive, and so on.
Configure the webserver of your choice such that it treats the docroot subdirectory (which you created as part of the first step) as your new blog's own docroot.

When running in its basic mode, Plerd does not provide a webserver; it simply generates static HTML & XML files, ready for some other process to serve up.

Usage

Running Plerd

Plerd includes two command-line programs:

plerdall creates a new website in Plerd's docroot directory, based on the contents of its source and templates directories. (It also provides a few other "one-off" utility functions, including the --init feature referred to above.)

Run this program (with no arguments) to initially populate your blog's docroot, and at any other time you wish to manually regenerate your blog's served files.
plerdwatcher runs a daemon that monitors the Dropbox-synced source directory for changes, republishing files as necessary.

This is where the magic happens. While both plerdwatcher and Dropbox's own daemon process run on your webserver's machine, any changes you make to your blog's source directory will instantly update your blog's published static files as appropriate.

Launch plerdwatcher through this command:
```
  plerdwatcher start
```
It also accepts the verbs stop, restart, and status, as well as all the command-line options listed in the App::Daemon documentation.

Composing posts

To start writing a new blog post, just create a new Markdown file somewhere outside of your blog's source directory. (Recall that any change to the source directory instantly republishes the blog, something you won't want to do with a half-written entry on top.) You can name this file whatever you like, so long as the filename ends in either .markdown or .md.

You must also give your post a title, sometime before you're ready to publish it. You define the title simply by having the first line of your entry say title: [whatever], followed by two newlines, followed in turn by the body of your post.

For example, a valid, ready-to-publish source file could be called today.markdown, and it could contain this, in full:

title: My day today

I had a pretty good day today. 

I hung out at [the coffee shop](http://empireteaandcoffee.com). Then I went home.

Well, that's all for now. Bye bye.

Publishing posts

To publish a post, simply move it to Plerd's source directory. (Take care not to overwrite an older post's source file that may have the same name.)

Plerd will, once it notices the new file, give the file a timestamp recording the date and time of its publication. This timestamp will appear in its own line, after the title line.

Normally, Plerd will set the publication time to the moment that you added the file to the source directory. Plerd recognizes two exceptions to this rule:

If you manually give your post a time: timestamp, and it's in W3C date-time format, then Plerd will leave that timestamp alone.
If you leave the timestamp out, and include in your post's filename a date of yesterday or earlier (e.g. 1994-06-10-i-like-ace-of-base.md), then Plerd will set the post's timestamp to midnight (in the local time zone) of that date. This allows you to batch-backdate many posts at once -- useful, perhaps, for populating a new blog with existing writing.

(Note that Plerd assumes you use a text editor smart enough to see that the source file has both moved and had additional lines added to it from an external process, and to react to this in a graceful fashion.)

Once it has prepared the source file, Plerd will update the blog. It will create a new HTML file for the new entry, and add a link to it from the archive.html page. It will also appear in the recent-posts sidebar of every other entry, as well as the Atom and JSON Feed documents (unless you decided to manually backdate the entry by specifying your own date attribute within the file).

Updating or deleting posts

To update a blog post, just edit its source Markdown file, right in the source directory. Any changes you make will immediately update your published blog as appropriate

To unpublish a blog post, simply move it out of the synced source directory -- or just delete it.

Using Plerd with Dropbox

Plerd loves Dropbox! (Indeed it had Dropbox affinity in mind from the beginning of its design.)

To have Plerd work with Dropbox, just place its working directory (the one containing the source, docroot, and template subdirectories) somewhere in your synced Dropbox folder, and specify the local path to this folder (from your webserver's point of view) in your Plerd config file.

Now, you can create, update, and delete blog posts just by moving and editing files, no matter what computer you're using, so long as it has access to that Dropbox folder.

In this way you could, for example, compose and edit blog posts via Markdown in your favorite text editor while sitting by the fire with your laptop in the back of your favorite coffee shop, publishing updates to your blog by hitting File → Save in your text editor, and not directly interacting with your webserver (or, indeed, with the Plerd software itself) in any way.

Advanced use

Customizing templates

For a brief guide to the template files and how to customize them for your blog, please see the Plerd wiki on GitHub.

User-defined attributes

You can add any attributes you'd like to your posts, and then refer to them from your templates via a hash named attributes attached to every post object. For example, if a post's metadata looks like this:

title: Example of user-defined attributes
byline: Sam Handwich

Then you can refer to post.attributes.byline to fetch that value from within the post.tt template file, even though "byline" is not an attribute that Plerd otherwise recognizes. (If a template refers to an attribute key that a post's source file does not define, it will simply return a blank value.)

Social-media metatags

By defining some extra attributes in both your blog's configuration file, you can direct Plerd to add Open Graph and Twitter Card-enabling metadata tags to each of your posts. This will allow services like Facebook, Twitter, and Slack to present attractive little summaries of your blogposts when displaying links to them.

These blog configuration options (all optional) are:

twitter_id: If present, then Plerd will try to attach Twitter Card metadata to each post, associated with the given Twitter username. (No leading '@', please. Yes, I know. It confuses the YAML parser. Sorry...)
image: If present, Plerd will use this URL as the location of a default image to use in the metadata for any post that doesn't define its own image attribute.

If not present, Plerd will not generate any social-media metadata for any post lacking an image attribute.
image_alt: A textual description of the image referenced by the image attribute. (Equivalent in usage to the "alt" attribute in an HTML <img> tag.) Plerd will just leave this blank, if you don't define it yourself.

To see examples of all the above, please see the file conf/plerd_example.conf.

Once you've configured your blog as described above, you can add these attributes to any post:

description: A very brief summary of this post.

If not defined, then Plerd will try to use the first paragraph of your post's text (after stripping out any markup) as the post's description.
image: The URL of an image to associate with this post within social-media links. (This could refer to image that also appears in your post by way of an HTML <img> tag, but it doesn't have to.)

If not defined, then Plerd will instead use the blog's image configuration directive. If that is also undefined, then Plerd will not generate any social-media metadata for this post.
image_alt: A textual description of the image referenced by the image attribute. (Equivalent in usage to the "alt" attribute in an HTML <img> tag.) Plerd will just leave this blank, if you don't define it yourself.

MultiMarkdown

Plerd supports MultiMarkdown syntax out of the box! Go ahead and put MultiMarkdown tables and stuff into your posts. it'll just work.

Webmention

Plerd supports Webmention, an open technology that allows websites to send simple "Hey, this page of mine contains a link to that page of yours!" messages to other websites. If the linking page employs Microformats2 metadata, then the target page can choose to display salient information about the mention, such as its author, or a summary of its content. It can adjust the format of this display depending upon the mention's apparent type -- a "like", a repost, a comment-style response, and so on.

Thus, with certain options enabled, Plerd can send webmentions to websites that your blog posts link to. Consult the documentation of the plerdwatcher and plerdall programs for details about Webmention-related options.

A note about encoding

Plerd assumes that all your source and template files are encoded as UTF-8.

Support

To report bugs or file pull requests, visit Plerd's GitHub repository.

To keep up to date on Plerd news, or to discuss the software with other users or developers, please join one of the project's mailing lists.

You may also simply simply email me, Jason McIntosh, directly. I am always interested to hear about other folks making use of Plerd, and I will do whatever I can to help them with it. All such feedback does tend to make the software that much better, after all!

Plerd has a homepage at its creator's website.

See Plerd at work

This software powers Jason McIntosh's blog, Fogknife, for which it was written.

Credits

Plerd is by Jason McIntosh ([email protected]). I would love to hear any thoughts about Plerd you would care to share, and welcome any questions or suggestions about it.

Contributors include:

Petter Hassberg
Joe Johnston
Christian Sánchez
David Turner
Rebecca Turner

This repository contains the image "Envelope" designed by Jon Testa, and the image "RSS" designed by useiconic.com. Both are shared through a Creative Commons Attribution 3.0 United States license, and come to this project via The Noun Project.

jmacdotorg/plerd

jmacdotorg

Reviews

Repository Details