kind-icon — colorful icons for completion in Emacs

This emacs package adds configurable icon or text-based completion prefixes based on the :company-kind property that many completion backends (such as lsp-mode and Emacs 28's elisp-mode) provide.

Examples

A few examples of kind-icon in action with lsp-mode providing completions:

With corfu and orderless:	Using text-based icons:
Mix of text and icons:	Blended background color disabled:

Installation

Get it from ELPA (e.g. M-x package-install RET kind-icon RET). Note that icon support requires the small library svg-lib. At present kind-icon has been tested extensively with the excellent corfu in-buffer completion front-end (from the maker of vertico, consult, marginalia, and more).

kind-icon works either as a "margin-formatter" (for supporting UI's such as corfu) or by wrapping the completion function, for other completion UI's which can handle the Emacs 28+ affixation-function completion property.

Using margin-formatters (preferred):

To enable for completion UI's with margin-formatters capability such as corfu:

(use-package kind-icon
  :ensure t
  :after corfu
  :custom
  (kind-icon-default-face 'corfu-default) ; to compute blended backgrounds correctly
  :config
  (add-to-list 'corfu-margin-formatters #'kind-icon-margin-formatter))

Wrapping completion-in-region:

The more generic approach of wrapping the completion-in-region-function would look like:

(use-package kind-icon
  :ensure t
  :config
  (add-hook 'my-completion-ui-mode-hook
   	    (lambda ()
   	      (setq completion-in-region-function
   		    (kind-icon-enhance-completion
   		     completion-in-region-function)))))

for whichever completion-ui you are using. Note that for this method to work, your completion UI must support the Emacs 28 affixation-function property.

Configuration

The configuration defaults should work fine, but kind-icon can be customized to change the icons and colors, preference of icons vs. short-text (or mixed) prefixes, and more. See the wiki for configuration ideas including alternative icon sets.

Variables

kind-icon has a few customization variables that allow you to configure its appearance. The easiest way to edit them is M-x customize-group kind-icon, which automatically takes care of cleaning the cache upon changes. If you change them directly from lisp during a session (e.g. with setq), call M-x kind-icon-reset-cache to reset the temporary kind-icon cache, so that the changes will take effect.

Important configuration variables:

• kind-icon-use-icons: If non-nil (the default), prefer icons for prefix badges. Otherwise, use text labels. Individual kind entries can also have their icons disabled by removing the :icon property in the mapping (see below). If svg-lib is unable to download a named icon and it is not cached on disk, text labels for that kind will be used as a fallback.

• kind-icon-mapping: This is the top level configuration mapping :company-kind "types" like 'variable and 'function. Each item in this list has the format (sym short-text :keyword value ...) where sym is the kind (a symbol), and short-text is the abbreviated text to display (if icons are not used), both of which must be present. The rest of the list is a property list with optional keys :icon and :face. The latter will be used to set the text foreground and (possibly) background colors on the badge. The former specifies an icon to use, and is simply a string name, by default from the free material icon library used by svg-lib. Try M-x customize-variable kind-icon-mapping for a nice interface including an icon Preview button. Pro-tip: keep your code buffer open with completion popped-up alongside the customization buffer. When you apply changes, they are immediately applied.

  Update: As of kind-icon v0.2, additional keywords supported by svg-lib can be utilized, including :collection, which allows the use of other icon libraries. In recent svg-lib versions, these include vscode-icons. Please note that only monochrome icons are supported; if you configure icons which have hard-coded colors in the SVG file (as some vscode-icons do), they will not be displayed correctly. If you want to switch the collection for all icons, add (e.g) :collection "octicon" to kind-icon-default-style.

• kind-icon-default-face: A face from which the icon background color will be taken and blended with the :face foreground color in the mapping table to create a custom background color. If not set, the frame default background color will be used for this purpose. Similarly, the foreground color for this face, if set, will be used if a :face foreground is missing from the mapping.

• kind-icon-blend-background: If non-nil, computes a blend between a nominal background color (from either the background property of kind-icon-default-face, if set, or frame background color) and the foreground :face. If kind-icon-blend-background is nil, the background is taken from the :face background, kind-icon-default-face, or frame background-color.

• kind-icon-blend-frac: The fractional blend between custom badge :face foreground and background (see above) color to use as a custom background for each badge. A value of 0.0 simply replicates the background color. Values should likely stay below 0.3 or so.

Colors

If you don't like the default colors of the icons, you can customize the associated face, choose another pre-existing face, or substitute your own face. You can also change how the background color is displayed.

Foreground color

Icon foreground colors are matched in the default mapping to the face colors used by font-lock in programming modes (variables, function names, etc.). This gives consistency with in-buffer highlighting. These colors are taken from the :face :foreground color in kind-icon-mapping. If no :face is set for some kind, the foreground is taken from kind-icon-default-face foreground, or, as a backup, the default frame foreground.

Background color

By default, kind-icon creates a blended background color that is a mix of a bit of the foreground color and the normal completion background (control the mix with kind-icon-blend-frac). Note that if your completion UI uses a different background color from your normal buffer, you should configure the face it uses in kind-icon-default-face. If you disable kind-icon-blend-background, kind-icon will use both the foreground and (if set) background from the configured :face for each kind, allowing you to configure arbitrary colors.

Icons

Check the material icon library for the default icons you can use, more than 7,000 of them! All you need to "use" an icon is its name. The easiest approach is to M-x customize-variable kind-icon-mapping, find the kind you are interested in, and change its icon. Hit the Preview button and check the message buffer to confirm it's the icon you were after, and Apply your changes.

Note that svg-lib, which kind-icon uses, downloads and caches icons, by default in .emacs.d/.cache/svg-lib/. If no network connection is present, and the icon has not been cached on disk, the short-text is used as a backup for that session.

And yes, you can use any icons!

In recent versions you can use icons from other "collections" supported by svg-lib; just add a :collection key to kind-icon-mapping (see above).

Old School: Text-based Icons

You can also use simple text-based prefixes instead of icons. The icons are quite lightweight so there shouldn't be much performance difference, but some may prefer a simpler look. A "text" icon is composed of either one or two characters (anything longer will be trimmed). Simply set the kind-icon-use-icons variable to nil and (if desired) customize the "Short-Text" in the mapping. Note that if you are not connected to the network, even if you have enabled icons, any icons which are not cached on disk will be replaced by their short text equivalents.

Previewing

Use M-x kind-icon-preview-all to reset and preview all icons (text and SVG icons both) in a view buffer. This also has the effect of pre-downloading all icons, courtesy svg-lib. Current defaults:

Theme changes

When the theme changes, the blend colors (if enabled) may need to be recomputed; use kind-icon-reset-cache to do so. If you want to enable this to happen automatically, see this post.

Debugging Tips

If you get an error mentioning corfu--post-command, and notice that you don't get a backtrace even after invoking toggle-debug-on-error, this is because backtraces are inhibited during post-command hooks. To re-enable them, evaluate the following (e.g. in your *scratch* buffer):

(advice-add 'corfu--post-command :around
	    (lambda (func)
	      (condition-case err
		  (funcall func)
		((debug error) (signal (car err) (cdr err))))))

Related Packages

A small set of packages related to kind-icon:

• corfu is a sleek in-buffer completion frontend which fully supports standard emacs completions providers (aka completion at point functions — CAPFs). It was the original to include the margin-formatter function support which kind-icon uses.
• company-mode is the all-inclusive completion system, and includes built-in support for icons based on the Microsoft VSCode set.
• all-the-icons is font-based icon library which can be used to enrich dired, neotree, the mode line and others with icons.
• all-the-icons-completion builds on all-the-icons to enrich minibuffer-based completion, including support for the excellent marginalia annotator.
• nerd-icons makes it easy to use many of the same icons supported via SVG download within a single installed NerdFont. See the wiki for config.

Notes

If you are using the emacs-mac fork of emacs on MacOS >=10.13, you should compile with librsvg support, as the native SVG support using WebKit2 is slow and will impact performance.

Thanks

• to @rougier for the excellent svg-lib.
• to @minad, who developed corfu (among many others) and contributed many great ideas to kind-icon.
• to @dgutov, maintainer of company, from which color-matching to font-lock faces was inspired.