Multi Camera Calibration Suite

This toolset provides the basics for calibrating a multi-camera scene. it contains six utilities for different purposes. In this README I will walk the user through the calibration of a multi camera scene using this toolset.

Dependencies

the use of this suite requires

Getting the source

clone the repository using :

git clone [email protected]:idiap/multicamera-calibration.git

Building the source

Go to the source directory

mkdir build
cd build
cmake .. -DCMAKE_BUILD_TYPE=Release
make

Compute intrinsic camera parameters

The intrinsic camera parameters are usually computed finding a known grid with multiple poses on different images. To do so we propose the following method.

Capture a video by waving the camera over a grid such as this one or that one. Extract then the frames as images in a folder then run the software bin\intrinsic

intrinsic [-h] [-n NUM] [-W WIDTH] [-H HEIGHT]
          [-p {chessboard,circles,asymmetric_circles}] [-o FULL_OUTPUT]
          [-s SELECT_OUTPUT]
          input output

          -h:     show help
          -n:     number of frames to use
          -w:     width of grid
          -h:     height of grid
          -p:     type of grid
          -o:     output for all frames with a visible grid (optionnal)
          -s:     output for all n frames (option -n) selected for the calibration computation (optionnal)
          input:  pattern for the images
          output: calibration file (json format)

For example: let's imagine we have the frames in the folder /home/user1/camera1/frames with the asymmetric circles grid provided earlier.

you would use the script this way

bin/intrinsic -o /home/user1/frames_with_grid -s /home/user1/camera1/selected_frames_with_grid /home/user1/camera1/frames/\*.bmp /home/user1/camera1/intrinsic.json

once the computation is done, the undistorted frames are shown.

'n' goes to next frame
'p' goes to previous frame
'q' quits

this produces the folders with the usable frames and the selected frames so that reproducing the calibration takes less time.

Compute extrinsic camera parameters

The extrinsic parameters are computed by clicking on points with known coordinates (in cm) in an image. The syntax is the following.

extrinsic [-h] [-p POINTS] [-o OUTPUT_POINTS] intrinsic input output

          -h:        show help
          -p:        saved points file, used to resume or correct the calibration (optionnal)
          -o:        output point file. this file will be used with the -p option (optionnal)
          intrinsic: intrinsic camera parameters
          input:     image to annotate
          output:    calibration output

Now using the intrinsic.json file we computed on the previous step, do.

bin/extrinsic /home/user1/camera1/intrinsic.json /home/user1/camera1/video_frames/000000.bmp /home/user1/camera1/extrinsic.json

it shows an the frame 000000.bmp you can left click on a point to add it. it will ask for x and y in cm. right click removes last point.

'q' quits without saving
's' computes the extrinsics and saves

Verify the 3d projections in the scene

Now both the intrinsic and extrinsic calibrations have been computed for cameras 1 to 4 to check the correspondance between the cameras, you can use the following utility

check3d [-h] intrinsic extrinsic images cameras
        -h: help
        intrinsic: pattern to intrinsic calibrations files
        extrinsic: pattern to extrinsic calibrations files
        images:    pattern to camera images (same frame for each camera)
        cameras:   camera list comma separated

using all our cameras calibrated, we would go to something like that

bin/check3d /home/user1/{}/intrinsic.json /home/user1/{}/extrinsic.json /home/user1/{}/video_frames/000000.bmp camera1,camera2,camera3,camera4

once the soft launched you get an image from the frame list. you can click on a point in some views, it will appear as a blue dot. once you clicked at least two views you get a red dot representing the projection on the other views. left click removes the blue dot. if you clicked wrong, a right click moves the blue dot to the new location.

pressing 'n' goes to the next image
pressing 'p' goes to the previous image
pressing 'r' resets the points
pressing 'q' quits the soft

Perform the bundle adjustment

to perform the bundle adjustment you need to provide annotations in the .pos format the pos format has one file per frame such as /home/user1/camera1/annotations/000000.pos is the annotation for the /home/user1/camera1/video_frames/000000.bmp image.

the pos format is done as such:

identity_name_1
0 x_val y_val
1 x_val y_val

identity_name_2
0 x_val y_val
1 x_val y_val

point number 0 corresponds to feet, 1 to head. point numbers can be sparse and identities don't have to exist on each frame

once some frames are annotated, run

build_ba [-h] [-f FIXED_POINTS]
         intrinsic extrinsic observations cameras output

         -h:           help
         -f:           pattern to known points that must remain at the same place 
                       i.e. points outputed by the -o option in extrinsic calibration (optionnal)
         intrinsic:    pattern to intrinsic calibrations files
         extrinsic:    pattern to extrinsic calibrations files
         observations: pattern to pos files
         cameras:      camera list comma separated
         output:       bundle adjustment problem file

bin/build_ba -f /home/user1/{}/points.json /home/user1/{}/intrinsic.json /home/user1/{}/extrinsic.json /home/user1/{}/annotations/\*.pos /home/user1/ba_problem.txt

then run the bundle adjustment

bundle_adjuster --input=input --output=output --intrinsic_adjustment=[fixed, unconstrained, two_pass]
                --input:                bundle adjustment problem file
                --output:               bundle adjustment problem file, post processing
                --intrinsic_adjustment: type of adjustment to perform

there are three types of adjustment

fixed: the intrinsics are fixed, only perform on the extrinsics
unconstrained: adjust all parameters
two_pass: run once fixed and then unconstrained

using our example, run

bin/bundle_adjuster --input=/home/user1/ba_problem.txt --output=/home/user1/processed_ba.txt

then we need to convert back the bundle adjustment problem file to camera calibrations

extract_ba [-h] input intrinsic extrinsic cameras
           -h:        help
           input:     bundle adjustment problem file
           intrinsic: output to intrinsic calibration file
           extrinsic: output to extrinsic calibration file
           cameras:   camera list comma separated

In our example it translates to

bin/extract_ba /home/user1/processed_ba.txt /home/user1/{}/intrinsic_ba.json /home/user1/{}/extrinsic_ba.json camera1,camera2,camera3,camera4

then you may check again the projections in 3d like seen previously

bin/check3d /home/user1/{}/intrinsic_ba.json /home/user1/{}/extrinsic_ba.json /home/user1/{}/video_frames/000000.bmp camera1,camera2,camera3,camera4

idiap/multicamera-calibration

idiap

Reviews

Repository Details