Bambu Lab

A Home Assistant Integration for Bambu Lab printers

Setup

To install, add this Github Repo to the HACS Custom Repositories, or click the badge above.

For now, you will need the following information:

(✔️ Optional accessory)

Sensor	X1C	X1	P1P	P1S
Aux Fan Speed	✅	✅	✔️	✔️
Bed Temperature	✅	✅	✅	✅
Chamber Fan Speed	✅	✅	❌	✅
Chamber Temperature	✅	✅	❌	❌
Cooling Fan Speed	✅	✅	✅	✅
Current Layer	✅	✅	✅	✅
Current Stage	✅	✅	✅	✅
End Time	✅	✅	✅	✅
Heatbreak Fan Speed	✅	✅	✅	✅
Nozzle Target Temperature	✅	✅	✅	✅
Nozzle Temperature	✅	✅	✅	✅
Print Progress	✅	✅	✅	✅
Print Status	✅	✅	✅	✅
Remaining Time	✅	✅	✅	✅
Speed Profile	✅	✅	✅	✅
Start Time	✅	✅	❌	❌
Target Bed Temperature	✅	✅	✅	✅
Total Layer Count	✅	✅	✅	✅
Timelapse Active	✅	✅	✅	✅

If AMS(s) are present, an additional 'Current Tray' sensor is present on the Printer device.

Sensor	X1C	X1	P1P	P1S
Chamber Light	✅	✅	✔️	✔️

This currently exposes the following Buttons:

Sensor	X1C	X1	P1P	P1S
Pause	✅	✅	✅	✅
Resume	✅	✅	✅	✅
Stop	✅	✅	✅	✅

Sensor	X1C	X1	P1P	P1S
Humidity Index	✅	✅	✅	✅
Tray 1	✅	✅	✅	✅
Tray 2	✅	✅	✅	✅
Tray 3	✅	✅	✅	✅
Tray 4	✅	✅	✅	✅
Tray Attributes:
Active	✅	✅	✅	✅
Color	✅	✅	✅	✅
Empty	✅	✅	✅	✅
K Value	❌	❌	✅	✅
Max Nozzle Temp	✅	✅	✅	✅
Min Nozzle Temp	✅	✅	✅	✅
Name	✅	✅	✅	✅
Type	✅	✅	✅	✅

Sensor	X1C	X1	P1P	P1S
External Spool	✅	✅	✅	✅
Attributes:
Active	✅	✅	✅	✅
Color	✅	✅	✅	✅
K Value	❌	❌	✅	✅
Max Nozzle Temp	✅	✅	✅	✅
Min Nozzle Temp	✅	✅	✅	✅
Name	✅	✅	✅	✅
Type	✅	✅	✅	✅

This currently exposes the following Diagnostic Sensors:

Sensor	X1C	X1	P1P	P1S
Wifi Signal	✅	✅	✅	✅
HMS Errors	✅	✅	✅	✅
Attributes:
Count	✅	✅	✅	✅
1-Error	✅	✅	✅	✅
1-Wiki	✅	✅	✅	✅
2-Error	✅	✅	✅	✅
2-Wiki	✅	✅	✅	✅
... and so on

Cameras are currently not supported across any Bambu Lab device, due to them using a proprietary streaming implementation.

If you want to see this changed, please comment and vote on this BambuStudio issue

Please check release_notes.md