There are no reviews yet. Be the first to send feedback to the community and the maintainers!
MMDVM
The firmware for the MMDVM (Multi-Mode Digital Voice Modem)MMDVMHost
The host program for the MMDVMDMRGateway
A multi-network DMR gateway for the MMDVM.YSFClients
System Fusion network servers; a gateway and a parrot.MMDVMCal
The calibration program for the MMDVMircDDBGateway
The ircDDB Gateway for D-StarP25Clients
Simple clients for P25. A gateway and a parrot.AMBETools
Programs for encoding and decoding AMBE files.NXDNClients
A gateway and a parrot for NXDN.M17Client
An M17 client designed for use with MMDVM modems and hotspots to allow for use as an M17 radioDummyRepeater
The Dummy Repeater allows a PC or similar with an AMBE codec (DV-Dongle, ThumbDV, etc) to appear as a D-Star Repeater.MMDVM-TNC
An AX.25 only version of the MMDVM firmwareDStarRepeater
The D-Star Repeater.M17Gateway
A gateway to the M17 reflectorsAPRSGateway
A single point of access to the APRS network for the other gateway programs.FMRepeater
A simple FM repeater controller, based on the old Analogue Repeater. It may be used with the UDRC from NWDR.MMDVM-UDRC
A version of the MMDVM to run on a Pi with a UDRC.DV4RX
A simple set of receivers for the DV4mini stick.MMDVM-Transcoder
A universal transcoder to match the DV modes available on the MMDVM.uWSDR
The source code for the uWSDR cross platform GUI complete with DSP engine for narrow-band modes.MMDVM-CrossMode
A crossmode daemon that makes use of the MMDVM-TransoderLinuxExtras
Optional startup and configuration files for ircDDB Gateway and the D-Star Repeater.Display-Driver
A display driver for MQTT based MMDVM systemsSTM32F4xx
DigitalVoice
The old Digital Voice project from the Yahoo group dstar_development files area.QO100Adapter
Interface between SDR Console and an FT-817 for the Arduino.MMDVM-TNC-Tester
Test a KISS TNC in loopback mode, based on Nino KK4HEJ's kiss-ax25-ui-batch.py and packet trace code.FMGateway
A Gateway between the MMDVM Host and different FM networksbaken
An old program for visualising microwave beacons in Europe. It is written in C and uses the GTK GUI library.Love Open Source and this site? Check out how you can help us