Phased LSTM

This is the official repository of "Phased LSTM: Accelerating Recurrent Network Training for Long or Event-based Sequences," presented as an oral presentation at NIPS 2016, by Daniel Neil, Michael Pfeiffer, and Shih-Chii Liu.

Rule of Thumb

In general, if you are using ~1000 timesteps or more in your input sequence, you can benefit from PLSTM.

If you're only answering bAbI tasks or doing negative log-likelihood on some paragraph of text, you're unlikely to see improvement from this model. However, for long sequences (e.g., whole-text summarization), or sequences which are fusing input from multiple sensors with different timing (e.g., one going at 3 Hz and the other at 25 Hz), this model is both natural and efficient.

Making it work well for speech and NLP is still experimental and ongoing work. If this is of interest to you, let me know and I can give you an update.

Now available in TensorFlow and Keras!

Up-to-date PyTorch implementation available: https://github.com/dannyneil/pytorch_plstm
Official Tensorflow implementation now available from Andrea Gesmundo at Google https://github.com/tensorflow/tensorflow/blob/master/tensorflow/contrib/rnn/python/ops/rnn_cell.py#L1720-L1861
Tensorflow implementation of the original experiment by Enea Ceolini can be found here: https://github.com/Enny1991/PLSTM
Tensorflow implementation with MNIST example from Philippe Remy: https://github.com/philipperemy/tensorflow-phased-lstm
Keras implementation by Francesco Ferroni: https://github.com/fferroni/PhasedLSTM-Keras

Freq Task 1

To run the first task, run the shell script a_freq_task.sh. It should load the first task with default parameters, training each model under each condition for 70 epochs. Afterwards, you can open A_Freq_Task.ipynb to render the results, which should show the following:

Freq Task 2

To run the second task, run the shell script b_freq_combo_task.sh. It should load the second task with default parameters, training each model with the more complex stimuli for 300 epochs (a long time!). Afterwards, you can open B_Freq_Combo_Task.ipynb to render the results, which should show the following:

It runs the same Python file as in task 1, but the data iterator is changed to be the more complex version.

PLSTM Notes

The essence of the PLSTM code (plstm.py) is the following lines:

def calc_time_gate(time_input_n):
    # Broadcast the time across all units
    t_broadcast = time_input_n.dimshuffle([0,'x'])
    # Get the time within the period
    in_cycle_time = T.mod(t_broadcast + shift_broadcast, period_broadcast)
    # Find the phase
    is_up_phase = T.le(in_cycle_time, on_mid_broadcast)
    is_down_phase = T.gt(in_cycle_time, on_mid_broadcast)*T.le(in_cycle_time, on_end_broadcast)
    # Set the mask
    sleep_wake_mask = T.switch(is_up_phase, in_cycle_time/on_mid_broadcast,
                        T.switch(is_down_phase,
                            (on_end_broadcast-in_cycle_time)/on_mid_broadcast,
                                off_slope*(in_cycle_time/period_broadcast)))

    return sleep_wake_mask

This creates the rhythmic mask based on some time_input_n which is a vector of times, one time for all neurons for each sample in the batch. The timestamp is broadcast to form a 2-tensor of size [batch_size, num_neurons] which contains the timestamp at each neuron for each item in the batch (at one timestep), and stores this in t_broadcast. We calculate the in_cycle_time, which ranges between 0 and the period length for each neuron. Then, subsequently, we use that in_cycle_time to figure out if it is in the is_up_phase, is_down_phase, or just the off phase. Then, we use T.switch to apply the correct transformation for each phase.

Once the mask is generated, we simply mask the cell state with the sleep-wake cycle (plstm.py):

def step_masked(input_n, time_input_n, mask_n, cell_previous, hid_previous, *args):
    cell, hid = step(input_n, time_input_n, cell_previous, hid_previous, *args)

    # Get time gate openness
    sleep_wake_mask = calc_time_gate(time_input_n)

    # Sleep if off, otherwise stay a bit on
    cell = sleep_wake_mask*cell + (1.-sleep_wake_mask)*cell_previous
    hid = sleep_wake_mask*hid + (1.-sleep_wake_mask)*hid_previous

Implementation notes

PLSTM was originally written in Theano. There are some subtle differences between e.g., Theano and Tensorflow. Some issues worth keeping in mind are:

Make sure r_on can't be negative
Make sure the period can't be negative
Check to see what mod(-1, 5) is to make sure it lines up with your intuition (e.g., negative symmetric or cyclical)
Think about whether or not you want to abs the phase shift

Also note that this doesn't take advantage of any sparse BLAS code. The latest TensorFlow code has some good CuSPARSE support, and the gemvi sparse instructions are great for computing the dense_matrix x sparse vector operations we need for Phased LSTM, and should absolutely offer speedups at the sparsity levels that are shown here. But, as far as I know, no one has yet publicly implemented this.

Default parameters

Generally, for "standard" tasks, you have an input of several hundred to a couple thousand steps and your neurons tend to be overcomplete. For this situation, the default parameters given here are pretty good:

Period drawn from np.exp(np.random.uniform(1, 6)), i.e., (2.71, 403) timesteps per cycle, where the chance of getting a period between 5 and 10 is the same as getting a period between 50 and 100.
An on ratio of around 5%; sometimes, for hard problems, you'll need to either turn on learning for this parameter, which gradually expands r_on towards 100% (because why not? The neuron can do better if it is on more often. However, an interesting avenue of research is adding an L2 cost to this, which is equivalent to having SGD find an accurate solution while minimizing compute cost). Alternatively, you can fix it at 10%, which generally seems like another good number so far.
A phase shift drawn from all possible phase shifts. If you don't cover all phase shifts, or don't have enough neurons, you'll have "holes" in time where no neurons are paying attention.
The "timestamp" for a standard input is the integer time index, ranging from 0 to num_timesteps.

Other Tasks

Other tasks are coming soon, when I can clean them up.

Citation

Please use this citation, if the code or paper was useful in your work:

@inproceedings{neil2016phased,
  title={Phased LSTM: Accelerating Recurrent Network Training for Long or Event-based Sequences},
  author={Neil, Daniel and Pfeiffer, Michael and Liu, Shih-Chii},
  booktitle={Advances In Neural Information Processing Systems},
  pages={3882--3890},
  year={2016}
}

Installation

Requires Lasagne and Theano. Other versions will be linked as the industrious community of brilliant ML programmers ports the implementation...

Reach out to me!

If you have any questions about this, please reach out to me at: [email protected]

dannyneil/public_plstm

dannyneil

Reviews

Repository Details