circuitvalley/LM399_Voltage_reference

Stars
11
Rank 1,694,829 (Top 34 %)
Language
Created over 6 years ago
Updated over 5 years ago

circuitvalley/LM399_Voltage_reference

circuitvalley

There are no reviews yet. Be the first to send feedback to the community and the maintainers!

Simple LM399 Voltage Reference board

USB_C_Industrial_Camera_FPGA_USB3

Source and Documentation files for USB C Industrial Camera Project, This repo contains PCB boards, FPGA , Camera and USB along with FPGA Firmware and USB Controller Firmware source.

mipi_csi_receiver_FPGA

MIPI CSI-2 Camera Sensor Receiver verilog HDL implementation For any generic FPGA. Tested with IMX219 on Lattice MachXO3LF. 2Gbps UVC Video Stream Over USB 3.0 with Cypress FX3. This is now Legacy Version!

mipi_dsi_bridge_fpga

Source code of MIPI DSI Bridge Published on https://www.circuitvalley.com

ttyMAY_linux_board

PCB Hardware/ Design Document For ttyMay DIY linux board

E-ink_ED060SC4_driver_msp430

Basic Amazon Kindle Eink Display Driver

USB3_MIPI_CSI2_RX_V2_Crosslink_NX

MIPI CSI-2 Camera Sensor Receiver V2 Verilog HDL implementation For any generic FPGA. Tested with IMX219 IMX477 on Lattice Crosslink NX with Hard MIPI PHY. Gbps UVC Video Stream Over USB 3.0 with Cypress FX3, Currently WIP

USB-Video-Class-Stack-PIC32-UVC

USB Video Class (UVC) Driver Implementation on Microchip USB Stack

Solar_LED_MPPT_Charger

Solar MPPT Charger Implemented with BQ24650 MPS430 MCU

IR-Remote-Control

NEC IR Decoder/ Reciver Libarary in C For Microcontroller

agilent_53131A_53132A_options

Source and Gerber Files for HP Agilent Keysight 53131A/53132A DIY upgrade published on www.circuitvalley.com

PE1005_USB3_camera

Source and Hardware file of PE1005S camera Module interfacing with Cypress FX3 USB 3.0

adf4351_usb_rf_gen_qt

Cross platform USB RF Signal Generator implemented with PIC16F1459 and Analog device ADF4351 , Qt.

trueposition_gpsdo_usb_oled

Open Source 10Mhz Isolated Distribution Amplifier. PIC18F25K50 TruePosition GPSDO Controller Firmware with USB and OLED Display.

Crosslink_NX_USB3_Boards

This repo contains source, Documentation/reference PCB boards for USB3 camera interface with Lattice Crosslink NX FPGA

E-ink_pic32_Clock

PIC32 Based E-Ink Display clock

Cypress-FX3-USB3

Project related to Cypress FX3 USB 3.0 Controller published on

USB-IO-Control-Board

USB HID Based Basic USB IO Board with Analog/Digital and PWM IO

microzed_carrier_board

Repo for Source files of Avent miroZed Carrier Boards

WireFrame-FPGA

Source files Related to WireFrame FPGA Board published on www.circuitvalley.com

USB_IO_Board_V3

HID USB IO Board V3 with Adance analog and Digital IO

Mains-TrueRMS-Meter

Mainline TrueRMS Voltage Meter implemented with MSP430 Microcontroller

Pickit2-Clone

TMS320_DSP

Agilent_1152A_Smart_Probe_Patch

PCB, EEPROM file for converting 1152A into smart probe

old_project_support_files

This Repo contains binary, source and document files for old projects published on

TLV320AIC23B-Audio-codec

LCD-Drivers

PM6680_PM6681_OCXO_time_base_option

This Repo contains Schematic and PCB Design file for DIY Fluke Philips PM66xx PM6680 PM6681 Ultra High Stability Oven Time Base Option

Zwei2_Breadboardable_PIC32MZ_Board

Files for PIC32MZ Devlopment board

low_power_wireless_sensor_MSP430_NRF

IR-Dimmer-Relay-Control

RF-Remote-Control

Source files for RF Remote control published on www.circuitvalley.com