###### ## #### # # #### ##### ###### ##### ####
# # # # # # # # # # # # # #
##### # # #### # ##### # # # ##### # # ####
# ###### # # # ##### # # # #
# # # # # # # # # # # # # # #
###### # # #### # #### # # ###### ##### ####
v3.8-dev Garden of New Jersey
Purpose:
This script leverages tools for stealing credentials during a pen test.
This version has gone through a complete code cleanup -> Thanks al14s & zero_chaos
Added - Macchanger thx to SilverFoxx
Added - Prerequisite test
########################################################################
1. Prereqs
2. Installation
3. Working with easy-creds in screen
4. Instructional videos
1. Prereqs:
* screen
* freeradius (with wpe patches)
* hamster
* ferret
* sslstrip
* dsniff
* urlsnarf
* metasploit
* airbase-ng
* airodump-ng
* hostapd
* mdk3
* ipcalc
* asleap
2. Installation:
Most can be installed from repos, we've included some instruction on installing from source when helpful.
easy-creds is available in some Linux distros already, so before spending a lot of time, try just installing it with your package manager.
If easy-creds is not available already in the repo for your distro please open a bug for them (no us) to add it, then feel free to follow the directions below:
To install SOME of the dependencies for debian/ubuntu based distros use the following command:
apt-get install screen hostapd dsniff dhcp3-server ipcalc aircrack-ng
###
aircrack-ng suite
There are known issues for airbase-ng with the base v1.1 version included in many distros. If that is what your distro provides it is recommended that you grab the latest nightly build from
the SVN repo and recompile.
Full instructions for installing aircrack-ng available here:
http://www.aircrack-ng.org/doku.php?id=install_aircrack
Follow either svn or nightly tarball guide:
http://www.aircrack-ng.org/doku.php?id=install_aircrack#latest_svn_development_sources
http://www.aircrack-ng.org/doku.php?id=install_aircrack#nightly_build
###
freeradius-wpe
The freeradius in the repo most likely does not include the wpe patch. It is best to install from source unless you are using a distro that already applied this very non-standard patch:
wget ftp://ftp.freeradius.org/pub/radius/old/freeradius-server-2.1.11.tar.bz2 -O /tmp/freeradius-server-2.1.11.tar.bz2
wget http://www.opensecurityresearch.com/files/freeradius-wpe-2.1.11.patch -O /tmp/freeradius-wpe-2.1.11.patch
cd /tmp
tar xf freeradius-server-2.1.11.tar.bz2
mv freeradius-wpe-2.1.11.patch /tmp/freeradius-server-2.1.11/freeradius-wpe-2.1.11.patch
cd freeradius-server-2.1.11
patch -p1 < freeradius-wpe-2.1.11.patch
./configure && make && make install
cd /usr/local/etc/raddb/certs/
./bootstrap
###
Hamster & Ferret
mkdir /opt/sidejack
cd /tmp
wget http://www.erratasec.com/erratasec.zip -O /tmp/erratasec.zip
unzip erratasec.zip
cd hamster/build/gcc4/
make
cp /tmp/ec-install/hamster/bin/* /opt/sidejack
rm -rf /tmp/ferret
svn checkout http://ferret.googlecode.com/svn/trunk/ /tmp/ferret
cd /tmp/ferret/
make
cp /tmp/ferret/bin/ferret /opt/sidejack/ferret
###
asleap
Asleap may be available in your package manager, if not, you can install like this:
wget http://www.willhackforsushi.com/code/asleap/2.2/asleap-2.2.tgz -O /tmp/asleap.tgz
cd /tmp
tar xf asleap.tgz
cd asleap
make
cp asleap /usr/local/sbin
cp genkeys /usr/local/bin
###
MDK3
wget http://homepages.tu-darmstadt.de/~p_larbig/wlan/mdk3-v6.tar.bz2 -O /tmp/mdk3-v6.tar.bz2
cd /tmp
tar xf mdk3-v6.tar.bz2
cd mdk3-v6
make && make install
3. Working with easy-creds within a screen
I don't want to assume everyone is perfectly comfortable with screen, but please read some tutorials from the web.
easy-creds will look for X windows running, but shouldn't find it on the pwnie and launch everything in a screen sessions. This can feel a bit like Inception once you're in a screen within a screen
The main thing to remember is once the easy-creds screen session launches you should do the following from command prompt.
screen -list (you should see the easy-creds session)
screen -r easy-creds
You are now interacting with the easy-creds screen session. Normally to view your screens you would press ctrl-a then " and this will show you what screens you have open in the session.
Where it gets tricky is when you have a screen session, then launch another screen session (easy-creds attacks). When that happens you will need to do the following:
ctrl-a then a then "
That extra 'a' lets the screen program know you want to work with the inner screen session.
Yes it is confusing a bit at first but you'll get the hang of it.
4. Instructional Videos:
Instructional videos can be found here -> http://www.youtube.com/user/Brav0Hax
Even if the version is not the same, the base functionality is.
Happy hunting!!
[email protected]
