set_gpu_fans_public
Controlling the fan speed of an NVIDIA GPU on a headless linux system requires spoofing a display. This can be used to gain a few percent additonal performance, at the cost of increased noise. For installation and usage, read the comments in cool_gpu.
temp of multi-gpu is individually obtained and adjusted
liuk@acgpu1 ~ $ nvidia-smi
Sat May 12 02:17:41 2018
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 396.24 Driver Version: 396.24 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 108... On | 00000000:18:00.0 Off | N/A |
| 90% 72C P2 202W / 250W | 2724MiB / 11178MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 1 GeForce GTX 108... On | 00000000:3B:00.0 Off | N/A |
| 90% 72C P2 196W / 250W | 2724MiB / 11178MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 2 TITAN V On | 00000000:86:00.0 Off | N/A |
| 80% 63C P2 142W / 250W | 2983MiB / 12066MiB | 100% Default |
+-------------------------------+----------------------+----------------------+
| 3 TITAN V On | 00000000:AF:00.0 On | N/A |
| 85% 66C P2 151W / 250W | 2983MiB / 12066MiB | 100% Default |
+-------------------------------+----------------------+----------------------+