bigtreetech/BIGTREETECH-SKR-E3-DIP-V1.0

Stars
121
Rank 293,924 (Top 6 %)
Language
C++
Created over 5 years ago
Updated about 2 years ago

bigtreetech/BIGTREETECH-SKR-E3-DIP-V1.0

bigtreetech

There are no reviews yet. Be the first to send feedback to the community and the maintainers!

BIGTREETECH SKR-E3-DIP-V1.0 motherboard is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.

BIGTREETECH-SKR-E3-DIP

V1.0 & V1.1

The BIGTREETECH SKR E3-DIP motherboard was launched by the 3D printing team BIGTREE Technology CO. LTD in Shenzhen (http://www.bigtree-tech.com/). This board is specially tailored as a direct upgrade for the Creality Ender-3/Ender-3 Pro 3D printer, perfect drop-in replacement for the original printer motherboard.

Features

Faster 32-bit processing
Support for silent Trinamic drivers
Greater expandability
- BLTouch
- TFT color touch screen
- filament runout sensor
- and more...

What's new with Board version V1.1:

Modified the SERVO port (hardware of board -- check PDF)
Firmware is compatible for both v1.0 and v1.1

BIGTREETECH-SKR-mini-E3

BIGTREETECH SKR-mini-E3 motherboard is a ultra-quiet, low-power, high-quality 3D printing machine control board. It is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.

BIGTREETECH-TouchScreenFirmware

support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1, TFT43, TFT50, TFT70

BIGTREETECH-SKR-V1.3

32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required

BIGTREETECH-OCTOPUS-V1.0

This is Octopus open source material

BIGTREETECH-SKR-PRO-V1.1

Aiming at some problems existing in 3D printed motherboards in the market. Bigtree Technology Co., Ltd. launched a high performance 3D printer master board with STM32F407ZGT6 as the core controller, BIGTREETECH-SKR-PRO-V1.1.

BIGTREETECH-TFT35-V3.0

TFT35 V3.0 is a medium size, dual-mode, ultra-clear 3D printer display and it is designed by Bigtree Technology co.,LTD. It is an excellent replacement for the standard 12864 LCD displays.

EBB

BTT-TFT35-E3-V3.0

BIGTREETECH TFT35-E3 V3.0 is a medium size, dual-mode, ultra-clear 3D printing machine display launched by the 3D printing team of Shenzhen BIGTREE Technology CO., LTD., which can perfectly replace the original LCD screen of Ender3 printer.

CB1

OS System image for CB1

SKR-2

BIGTREETECH-OCTOPUS-Pro

This is OCTOPUS Pro open source material

BIGTREETECH-TMC2209-V1.2

TMC2209 is an ultra-silent motor driver IC for two-phase stepper motors. Its continuous drive current is 2A and peak current is 2.8A. Compared with TMC2208, the driving current of this IC is not only improved by 0.6a-0.8a, but also this IC increases the function of locked-motor test.

OctoBTT

smart-filament-detection-module

BIQU-B1

SKR-Pico

BIGTREETECH-TouchScreenHardware

This library contains all the open source materials of BIGTREETECH touch screen hardware.

SKR-3

Manta-M8P

Bigtree3DPluginSuit

Gcode model preview icon

BIGTREETECH-Relay-V1.2

BIGTREETECH Relay V1.2 is an upgrade of the original (BIGTREETECH V1.0). After upgrading, a small MCU was added on the module to make the module more controllable and stable. Besides, we have also increased short circuit detection circuit. After connecting the 5V and GND on the motherboard to the module, if there is a 5V short circuit, the module will immediately power off to prevent damage on the motherboard and the risk of fire caused by short circuit.

BIGTREETECH-S42B-V1.0

The closed-loop drive is to feedback the rotation angle of the stepping motor to the control panel, compare the distance that needs to be rotated with the distance of the actual rotation, calculate the error value, and then compensate, so as to prevent the problem of multi-step and lost step. The closed-loop drive can completely overcome the lost step of the open-loop stepping motor, and can also significantly improve the performance of the motor at high speed

BIGTREETECH-GTR-V1.0

BIGTREETECH GTR V1.0 motherboard is a high-performance 3D printer main control board with the core controller STM32F407IGT6, which was launched by the 3D printing team of ShenZhen BigTree Technology CO.,LTD ., aiming at solving some problems existing in the motherboard market. The BIGTREETECH GTR V1.0 is the motherboard, and the BIGTREETECH M5 V1.0 is the expansion board.

BIGTREETECH-Stepper-Motor-Driver

BIGTREETECH-SKR-E3-Turbo

ramps-1.6

The RAMPS 1.6 is the second RAMPS iteration released by BIGTREETECH. It replaces the original green power connector with a pair of screw terminals, adds a larger heatsink over the MOSFETS, and has a larger bed MOSFET. It maintains the surface-mounted fuses and flush MOSFETS of the RAMPS 1.5.

BIGTREETECH-MINI-UPS-V2.0

BigTree Technology Co., Ltd. developed this power failure module to detect a power failure during printing and ensuring the print can be resumed after power is returns.

BIGTREETECH-TMC2208-V3.0

KNOMI

U2C

BTT-Expansion-module

BTT EXP MOT V1.0、BTT RRF WiFi V1.0、BTT EEPROM V1.0

CB1-Kernel

BTT-SD-TF-Cloud-V1.0

BTT SD/TF Cloud V1.0 is launched by the 3D printing team of ShenZhen BigTree Technology CO.,LTD ., which is a module for wireless file transmission between the master computer and the 3D printer, so that you can get rid of the constraint of plugging SD card.

BIQU-BX

BIQU-BX 3D Printer

BTT-E3-RRF

HermitCrab

BIGTREETECH-TFT24-V1.1

BIGTREETECH TFT24-V1.1 is a small volume ultra-clear 3D printer display board. It can work in two modes. The board is launched by the 3D printing team of Shenzhen BIGTREE Technology co., LTD. This board can replace LCD12864 for use.

BIGTREETECH-TMC5160-V1.0

The TMC5160 contains the complete intelligence which is required to drive a motor. Receiving target positions the TMC5160 manages motor movement. Based on TRINAMICs unique features stallGuard2, coolStep, dcStep, spreadCycle, and stealthChop, the TMC5160 optimizes drive performance. It trades off velocity vs. motor torque, optimizes energy efficiency, smoothness of the drive, and noiselessness.；2-phase stepper motors up to 20A coil current (external MOSFETs) Motion Controller with sixPoint™ ramp

BTT-WRITER-V1.0

BigTree Technology Co., Ltd. developed this module for the use on firmware flashing, serial port debugging and so on.

Raspberry-Pad

BIGTREETECH-SKR-V1.1

32bit board with LPC1768, support marlin2.0 and smoothieware

BIGTREETECH-TMC2130-V3.0

BTT-Pi

PI4B-Adapter

BIGTREETECH-TFT35-V1.2

3.5inch Serial Port Touch Screen, Support Marlin/Smoothieware/etc..

BIGTREETECH-TFT35-V2.0

BIGTREETECH TFT35-V2.0 is a medium size and ultra-clear 3D printing machine display launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD.

MINI-12864

BGTHREETECH MINI 12864 V1.0

BIGTREETECH-SKR-MINI-V1.1

ARM Cortex-M3 series STM32F103RCT6 chip with 32-bit CPU 72MHz. Equipped with highly modular open source firmware Marlin2.0, convenient for users DIY and secondary development, exempt from the worries of the core code;

Manta-E3EZ

BIGTREETECH-SKR-CR6

Octopus-Max-EZ

MMU2-DIP

MMU 3-axis stepper control

BIQU-B1-SE-PLUS

B1SE firmware ,B1SE PLUS firmware and B1 SE PLUS IDEX FILE

Manta-M5P

TFT35-SPI

Manta-M4P

BiQU_Tool

A 3D Preview Tool

BIGTREETECH-S42A-V1.0

The closed-loop drive is to feedback the rotation angle of the stepping motor to the control panel, compare the distance that needs to be rotated with the distance of the actual rotation, calculate the error value, and then compensate, so as to prevent the problem of multi-step and lost step. The closed-loop drive can completely overcome the lost step of the open-loop stepping motor, and can also significantly improve the performance of the motor at high speed

H2-Series

TMC2209-V1.1

TMC2209 is an ultra-silent motor driver IC for two-phase stepper motors. Its continuous drive current is 2A and peak current is 2.8A. Compared with TMC2208, the driving current of this IC is not only improved by 0.6a-0.8a, but also this IC increases the function of locked-motor test.

BigtreeDesignAssistant

3D-Printer TFT Preview and Replace icon

Tango-3D-Printer-Motherboard

An Open Source ATMEGA2560 based 3D printer controller board.

Pad7

IO2CAN

docs

OctoBTT_V2_GUI_Sigma

OctoBTT new version of the GUI test source code, include the deployer

BIGTREETECH-MAX31865

BIGTREETECH-MAX31865 V1.0 and V2.0

BIGTREETECH-SKR-MINI-MZ

MicroProbe

BIGTREETECH-TMC5161-V1.0

BIGTREETECH-EZ-Driver

btt-mainsail-theme

BigTreeTech theme for mainsail

BIGTREETECH-TMC2130-V2.0

Configuration:CFG microsteps: Up to 1/256 microPlyer: 1/256 Logic Voltage VI0: 3-5V Motor Voltage : 5.5-46V Motor Phase Current: 1.2A RMS, 2.5A Peak;

Rumba32

Document

BIQU-Hurakan

BIGTREETECH-TMC2130-V1.1

Configuration: CFG/SPI microsteps: Up to 1/256 microPlyer: 1/256 Logic Voltage VI0: 3-5V Motor Voltage : 5.5-46V Motor Phase Current: 1.2A RMS, 2.5A Peak

BIGTREETECH-TMC2208-V2.1

TMC2208 single-axis stepper motor drive chip, power tube built-in drive current 1.4A peak current 2A, voltage range 4.75V-36V, 256 subdivision;MicroPlyer: 1/2, 1/4, 1/8, 1/16, 1/32

BIGTREETECH-TMC2225-V1.0

The TMC2225 are ultra-silent motor driver ICs for two-phase stepper motors.

BIQU-B2

BIQU-Thunder

bigtreetech.github.io

BTT002-V1.0

BIGTREETECH-TFT35-MZ

BIQU-Legend

BIGTREETECH-TFT2.8

sunxi-tools

BIQU-B1-SE

Open source materials containing BIQU B1 SE and B1 SE PLUS two machines

Terminator

BIGTREETECH-TMC2208-V1.0

Configuration:CFG or UART microsteps: Up to 1/256 microPlyer: 1/256 Logic Voltage VI0: 3-5V Motor Voltage : 5.5-36V Motor Phase Current: 1.2A RMS, 2.0A Peak

ADXL345

TFT43-DIP

BIGTREETECH-ST820-V1.0

Supply voltage from 7 V to 45 V.Output current up to 1.5 A rms for each motor phase.Stepper motor driving with a microstepping resolution up to 1/256th of step

MMB-Cubic