flipperzero_esp8266_deautherv2

Flipper Zero esp8266 deauther app.

Based off the WiFi Marauder App from 0xchocolate.

Thanks to Roguemaster for fixing some issues I had with the code and didnt get a chance to get to. I have now uploaded these changes into the source.

I have also successfully built this with unleashed souce as well and included the FAP file here. unleashed version unlshd-022 or API version 11.2

Original Code is from: https://github.com/0xchocolate/flipperzero-firmware-with-wifi-marauder-companion

uses the Version 2 of the ESP8266 Deauther code. https://github.com/SpacehuhnTech/esp8266_deauther/tree/v2/esp8266_deauther

This is done so you can use the original deauther v2 firmware on the esp8266. you can just flash the latest binary.

also a shout out to https://github.com/SequoiaSan/FlipperZero-Wifi-ESP8266-Deauther-Module Unfortunatly I could not get this past the menu when I compiled his deauther source for the nodemcu. Nice menu though. Turns out you need more than just serial connections for it to work with his firmware.

I used a nodeMCU board. Wiring is simple. follow the wiring guide on https://github.com/SequoiaSan/FlipperZero-WiFi-Scanner_Module On mine I connected one G to ground, VIN to 5V, RX to U_TX, TX to U_RX.

NodeMCU---FlipperZero

G---------GND

VIN-------5V

RX--------U_TX

TX--------U_RX

Video in action (old version). https://youtu.be/_RFzZyPkeR0

New video and install/build instructions. https://youtu.be/CKK7t0TaRVQ

If you want to disable the built in WiFi access and web interface (only use flipper to send serial commands) then select "set webinterface false", "save settings" and "reboot". When it starts back up you wont see the pwned AP any more.

I have installed this into Roguemaster and unleashed to test.

To install: Copy FAP to apps folder on flipper SD card.

To compile: git clone --recursive https://github.com/RogueMaster/flipperzero-firmware-wPlugins.git cd flipperzero-firmware-wPlugins/

copy folder into applications. add "APPS_wifi_deauther", to the meta/application.fam file.

compile following the selected firmware build instructions.