Test2::Suite - Distribution with a rich set of tools built upon the Test2 framework.

Rich set of tools, plugins, bundles, etc built upon the Test2 testing library. If you are interested in writing tests, this is the distribution for you.

• TOOLS

  Tools are packages that export functions for use in test files. These functions typically generate events. Tools SHOULD NEVER alter behavior of other tools, or the system in general.

• PLUGINS

  Plugins are packages that produce effects, or alter behavior of tools. An example would be a plugin that causes the test to bail out after the first failure. Plugins SHOULD NOT export anything.

• BUNDLES

  Bundles are collections of tools and plugins. A bundle should load and re-export functions from Tool packages. A bundle may also load and configure any number of plugins.

If you want to write something that both exports new functions, and effects behavior, you should write both a Tools distribution, and a Plugin distribution, then a Bundle that loads them both. This is important as it helps avoid the problem where a package exports much-desired tools, but also produces undesirable side effects.

• Test2::V#

  These do not live in the bundle namespace as they are the primary ways to use Test2::Suite.

  The current latest is Test2::V0.

    use Test2::V0;
    # strict and warnings are on for you now.
  
    ok(...);
  
    # Note: is does deep checking, unlike the 'is' from Test::More.
    is(...);
  
    ...
  
    done_testing;
  

  This bundle includes every tool listed in the "INCLUDED TOOLS" section below, except for Test2::Tools::ClassicCompare. This bundle provides most of what anyone writing tests could need. This is also the preferred bundle/toolset of the Test2 author.

  See Test2::V0 for complete documentation.

• Extended

  ** Deprecated ** See Test2::V0

    use Test2::Bundle::Extended;
    # strict and warnings are on for you now.
  
    ok(...);
  
    # Note: is does deep checking, unlike the 'is' from Test::More.
    is(...);
  
    ...
  
    done_testing;
  

  This bundle includes every tool listed in the "INCLUDED TOOLS" section below, except for Test2::Tools::ClassicCompare. This bundle provides most of what anyone writing tests could need. This is also the preferred bundle/toolset of the Test2 author.

  See Test2::Bundle::Extended for complete documentation.

• More

    use Test2::Bundle::More;
    use strict;
    use warnings;
  
    plan 3; # Or you can use done_testing at the end
  
    ok(...);
  
    is(...); # Note: String compare
  
    is_deeply(...);
  
    ...
  
    done_testing; # Use instead of plan
  

  This bundle is meant to be a mostly drop-in replacement for Test::More. There are some notable differences to be aware of however. Some exports are missing: eq_array, eq_hash, eq_set, $TODO, explain, use_ok, require_ok. As well it is no longer possible to set the plan at import: use .. tests => 5. $TODO has been replaced by the todo() function. Planning is done using plan, skip_all, or done_testing.

  See Test2::Bundle::More for complete documentation.

• Simple

    use Test2::Bundle::Simple;
    use strict;
    use warnings;
  
    plan 1;
  
    ok(...);
  

  This bundle is meant to be a mostly drop-in replacement for Test::Simple. See Test2::Bundle::Simple for complete documentation.

• Basic

  Basic provides most of the essential tools previously found in Test::More. However it does not export any tools used for comparison. The basic pass, fail, ok functions are present, as are functions for planning.

  See Test2::Tools::Basic for complete documentation.

• Compare

  This provides is, like, isnt, unlike, and several additional helpers. Note: These are all deep comparison tools and work like a combination of Test::More's is and is_deeply.

  See Test2::Tools::Compare for complete documentation.

• ClassicCompare

  This provides Test::More flavored is, like, isnt, unlike, and is_deeply. It also provides cmp_ok.

  See Test2::Tools::ClassicCompare for complete documentation.

• Class

  This provides functions for testing objects and classes, things like isa_ok.

  See Test2::Tools::Class for complete documentation.

• Defer

  This provides functions for writing test functions in one place, but running them later. This is useful for testing things that run in an altered state.

  See Test2::Tools::Defer for complete documentation.

• Encoding

  This exports a single function that can be used to change the encoding of all your test output.

  See Test2::Tools::Encoding for complete documentation.

• Exports

  This provides tools for verifying exports. You can verify that functions have been imported, or that they have not been imported.

  See Test2::Tools::Exports for complete documentation.

• Mock

  This provides tools for mocking objects and classes. This is based largely on Mock::Quick, but several interface improvements have been added that cannot be added to Mock::Quick itself without breaking backwards compatibility.

  See Test2::Tools::Mock for complete documentation.

• Ref

  This exports tools for validating and comparing references.

  See Test2::Tools::Ref for complete documentation.

• Spec

  This is an RSPEC implementation with concurrency support.

  See Test2::Tools::Spec for more details.

• Subtest

  This exports tools for running subtests.

  See Test2::Tools::Subtest for complete documentation.

• Target

  This lets you load the package(s) you intend to test, and alias them into constants/package variables.

  See Test2::Tools::Target for complete documentation.

• BailOnFail

  The much requested "bail-out on first failure" plugin. When this plugin is loaded, any failure will cause the test to bail out immediately.

  See Test2::Plugin::BailOnFail for complete documentation.

• DieOnFail

  The much requested "die on first failure" plugin. When this plugin is loaded, any failure will cause the test to die immediately.

  See Test2::Plugin::DieOnFail for complete documentation.

• ExitSummary

  This plugin gives you statistics and diagnostics at the end of your test in the event of a failure.

  See Test2::Plugin::ExitSummary for complete documentation.

• SRand

  Use this to set the random seed to a specific seed, or to the current date.

  See Test2::Plugin::SRand for complete documentation.

• UTF8

  Turn on utf8 for your testing. This sets the current file to be utf8, it also sets STDERR, STDOUT, and your formatter to all output utf8.

  See Test2::Plugin::UTF8 for complete documentation.

• AuthorTesting

  Using this package will cause the test file to be skipped unless the AUTHOR_TESTING environment variable is set.

  See Test2::Require::AuthorTesting for complete documentation.

• EnvVar

  Using this package will cause the test file to be skipped unless a custom environment variable is set.

  See Test2::Require::EnvVar for complete documentation.

• Fork

  Using this package will cause the test file to be skipped unless the system is capable of forking (including emulated forking).

  See Test2::Require::Fork for complete documentation.

• RealFork

  Using this package will cause the test file to be skipped unless the system is capable of true forking.

  See Test2::Require::RealFork for complete documentation.

• Module

  Using this package will cause the test file to be skipped unless the specified module is installed (and optionally at a minimum version).

  See Test2::Require::Module for complete documentation.

• Perl

  Using this package will cause the test file to be skipped unless the specified minimum perl version is met.

  See Test2::Require::Perl for complete documentation.

• Threads

  Using this package will cause the test file to be skipped unless the system has threading enabled.

  Note: This will not turn threading on for you.

  See Test2::Require::Threads for complete documentation.

See the Test2 documentation for a namespace map. Everything in this distribution uses Test2.

Test2::Manual is the Test2 Manual.

Many Test2 developers and users lurk on irc://irc.perl.org/#perl. We also have a slack team that can be joined by anyone with an @cpan.org email address https://perl-test2.slack.com/ If you do not have an @cpan.org email you can ask for a slack invite by emailing Chad Granum [email protected].

The source code repository for Test2-Suite can be found at https://github.com/Test-More/Test2-Suite/.

• Chad Granum [email protected]

• Chad Granum [email protected]

Copyright 2018 Chad Granum [email protected].

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

See http://dev.perl.org/licenses/