Starting Jun 2020, I will reactivate this repo and use it to help a onging research Revise a number of conventions
-
Old Code And Old README -
Two years ago after reading "Legged Robots that Balance", I started to work on a MATLAB simulation of a quadruped robot. Initially this project is put in my "toy_code" repo. This semester I will use this quadruped robot for two of my CMU course projects. So it is necessary to create a dedicated repository for it.
General Principle
Simulate a walking quadruped robot is easy (But remember all simulations are wrong), first construct body and legs, then carefully understand the frame transformations among them to get forward and inverse kinematics. So the robot knows how to place its feet.
Then find a good method to simulate the contact forces between a foot and the ground. This is proved to be very difficult because few exisiting contact models are precise enough compared to real world scenario. Besides, bad contact force model can make simulation run slower, for the contact force will make the entire simulation model "stiff". In the current implementation, I use Simscape Multibody Contact Forces Library created by Steve Miller.
Then design a gait planner to move feet in a periodic manner.
Helper code:
- forward_kinematics.m Calculate forward kinematics of the robot leg (Each leg is a simple three-joint manipulator. From shoulder to foot tip, jonts are labelled as "shoulder", "upper" and "knee". Then in the forward kinematics they are abbreviated as "s" "u" and "k")
- inverse_kinematics.m Calculate inverse kinematics
- init_quad_new_leg.m Initialize some parameters
quad_XXXX.slx will be the name of different models. I will make sure all quad_XXXX.sx file has a corresponding init_quad_XXXX.m initialization file.
By Dec-6-2018, the best running model is
quad_new_leg_raibert_strategy_v2.slx
and its init file
init_quad_new_leg_raibert_strategy_v2.m
Notice:
- Check this post to properly use contact forces library