JosueAGtz/cistercianDisplay

Stars
23
Rank 1,016,462 (Top 21 %)
Language
C++
Created over 2 years ago
Updated almost 2 years ago

JosueAGtz/cistercianDisplay

JosueAGtz

There are no reviews yet. Be the first to send feedback to the community and the maintainers!

31 segments digital Cistercian Display with constant current serial to parallel driver.

displayArray

The display array is a board that sets 6 ST7735 display with a resolution of 80x160px in a linear array sharing the clock, data, rs, backlight pins together, and leaving individual access to the cs lines of each display, This board allows you to display images with a resolution of 480x160px.

ESP32-S2-Stick

Breadboard compatible development board featuring the ESP32-S2 series of SoC, Xtensa® single-core 32-bit LX7 microprocessor 4 MB flash and optional 2 MB PSRAM in chip package 26 GPIOs, rich set of peripherals as UART,SPI,I2C,TOUCH,DAC,ADC and USB, a 2x2mm SK6812 RGB serial LED and a 0603 SMD blue LED. USB-C connector, castellated holes for low profile integrations and a on board PCB antenna.

dynamixelInterface

Dynamixel Interface board for communicating a Dynamixel motor with your preferred MCU.

ESP32-S3-Stick

ESP32-S3 is a dual-core XTensa LX7 MCU, capable of running at 240 MHz. Apart from its 512 KB of internal SRAM, it also comes with integrated 2.4 GHz, 802.11 b/g/n Wi-Fi and Bluetooth 5 (LE) connectivity that provides long-range support. It has 45 programmable GPIOs and supports a rich set of peripherals.

dynamixelHat

Raspberry Pi Zero and B Dynamixel Hat designed as an easy to use interface for using Dynamixel servo motors with a Raspberry Pi Zero SBC.