NUC8I5BEH Hackintosh (OpenCore)

English | 简体中文

Supported macOS versions

• macOS Mojave
• macOS Catalina
• macOS Big Sur
• macOS Monterey
• macOS Ventura

Config

• OS: macOS Ventura 13.4 22F66 x86_64 / Macmini8,1
• OpenCore: 0.9.1
• CPU: Intel® Core™ i5-8259U Processor (6M Cache, up to 3.80 GHz)
• SSD: 2TB FANXIANG S790
• RAM: 16GB x 2 ADATA DDR4 2666
• BIOS: 0078
• Monitor: KOIOS K2721UD 4K 27

BIOS Settings

• Disable
  • Legacy Boot
  • Fast Boot
  • Network Boot
  • Secure Boot
  • Inter VT for directed I/VO(VT-d)
• Enable
  • Boot USB Devices First
  • Boot Network Devices Last
• Wake on LAN from S4/S5
  • Stay Off

How to install

1. Put EFI and NUC8_MacOnlineInstaller into a Fat 32 format USB flash driver's root directory
2. Run the corresponding script file in NUC8_MacOnlineInstaller depending on your operating system
3. Restart computer and install macOS with the USB flash driver After all steps above are completed

Active iMessage/FaceTime

1. Genarate Serial Number, Board Serial Number and SmUUID with Hackintool
2. Check your Serial Number on https://checkcoverage.apple.com, and make sure the result looks like the picture below, otherwise genarate them again (and again)
3. Replace Serial Number, Board Serial Number and SmUUID in config.plist
4. Restart computer

Show your support

Give a ⭐️ if this project helped you!