Discover JF002/bl602_cmake_mcusdk Open Source project by JF (@JF002)

Stars
1
Language CMake
Created over 3 years ago
Updated about 3 years ago

JF002

There are no reviews yet. Be the first to send feedback to the community and the maintainers!

Simple project based on the [MCU SDK from Bouffalo](https://github.com/bouffalolab/bl_mcu_sdk) for the BL602 RISC-V MCU.

InfiniTime

Firmware for Pinetime smartwatch written in C/C++ and based on FreeRTOS

717

cfGUI

A simple GUI library for M5Stack (ESP32)

C++

nrf52-baseproject

Base project for NRF52 application. Take a look at branches for specific project (like freertos)

bl602_cmake_base

CMake project for BL602 RISC-V processor

cfRFM69

RFM69 driver library for ESP32/Arduino

C++

esp32-simple-ulp

A very simple example on how to use the ULP, the low-power coprocessor integrated into the ESP32

jfbrew

JFBrew is a DIY temperature controller for a beer fermentation chamber.

C++

Pinetime-bootloader

Bootloader for pinetime

infinitime.io

Source of https://infinitime.io

HTML

lopy-snippets

Code snippets in Micropython for the Pycom Lopy board

Python

Touchradio

QT5-based UI for LogitechMediaServer - Squeezebox, designed to run on RaspberryPi

C++

QT5_Examples

Examples in QT5

C++

pinetime-lvgl-simulator

RFM69_Doorbell

Using a RFM69 to send and receive data frame from Honeywell doorbell.

C++

ESP8266_HASS

Motion sensor (PIR), RGB LED (WS8212) and temperature/humidity (DHT11) connected to a WemosD1 (ESP8266) and communicating with Home-assistant via Wifi and MQTT

C++

PyOmxPlayer

C/C++ python extension module that interfaces to OmxPlayer

Pinetime-bootloader-testapps

Basic test applications for pinetime-bootloader

MicroMastoBot

A simple bot for Mastodon, written in MicroPython and running on a Lopy board (ESP32)

Python

TouchRadio-Python

The goal of this project is to create a radio player using RaspberryPi and a touchscreen

Python

JF002/bl602_cmake_mcusdk

JF002

Reviews

Repository Details

More Repositories