There are no reviews yet. Be the first to send feedback to the community and the maintainers!
core
Module of FreePBX (Core) ::framework
This module provides a facility to install bug fixes to the framework code that is not otherwise housed in a modulehotelwakeup
Module of FreePBX (Wake Up Calls) :: FreePBX module for generating reminder and wakeup callsivr
Module of FreePBX (IVR) :: Creates Digital Receptionist (aka Auto-Attendant, aka Interactive Voice Response) menus. These can be used to send callers to different locations (eg, Press 1 for sales) and/or allow direct-dialing of extension numbers.webrtc
Module of FreePBX (WebRTC Phone) :: The WebRTC Module allows an Administrator to enable a "WebRTC phone" that can be attached to a user's extension which they can connect to through FreePBX User Control Panel, this WebRTC phone will then receive phone calls at the same time as the users extension using user and device mode behind the scenes. If you have User and Device Mode enabled any extension you enable the WebRTC Phone a duplicate extension of 99XXXX will be created (where XXXX is the original extension number), when the user then views the web interface of the WebRTC phone they will be connected to device 99XXXX which will receive calls from the original extensionfax
Module of FreePBX (Fax Configuration) :: Adds configurations, options and GUI for inbound faxingsipsettings
Module of FreePBX (Asterisk SIP Settings) :: Use to configure Various Asterisk SIP Settings in the General section of sip.conf. Also includes an auto-configuration tool to determine NAT settings. The module assumes Asterisk version 1.4 or higher. Some settings may not exist in Asterisk 1.2 and will be ignored by Asterisk.cdr
Module of FreePBX (CDR Reports) :: Call Data Record report tools for viewing reports of your callsapi
cidlookup
Module of FreePBX (CallerID Lookup) :: Allows CallerID Lookup of incoming calls against different sources (OpenCNAM, MySQL, HTTP, ENUM, Phonebook Module)contactmanager
Module of FreePBX (Contact Manager) :: Contact Managercxpanel
Module of FreePBX (iSymphonyV3) :: This module automatically configures the operator panel to reflect the PBX configuration.certman
Module of FreePBX (Certificate Manager) :: Certificate Manager for Asterisk. Used for TLS, DTLS connection (think WebRTC and secure traffic)dahdiconfig
Module of FreePBX (DAHDi Config) ::firewall
Module of FreePBX (System Firewall) :: Integrated FreePBX Firewall. Currently works with RHEL 6 and RHEL 7 compatible distributionslogfiles
Module of FreePBX (Asterisk Logfiles) ::devtools
callrecording
Module of FreePBX (Call Recording) :: Provides much of the call recording functionality.calendar
Module of FreePBX (Calendar) :: This module is used to manage calendar and time based events for FreePBXtts
Module of FreePBX (Text To Speech) :: Allows you to configure text to speech, and is derived from texttospeech provided in contributed modules.digium_phones
music
Module of FreePBX (Music on Hold) :: Uploading and management of sound files (wav, mp3) to be used for on-hold music.xmpp
Module of FreePBX (XMPP) :: Manage and configure a XMPP Server Prosody and requires the Prosody RPM from your PBX be installed.recordings
Module of FreePBX (Recordings) :: Creates and manages system recordings, used by many other modules (eg, IVR).customappsreg
Module of FreePBX (Custom Applications) :: Registry to add custom extensions and destinations that may be created and used so that the Extensions and Destinations Registry can include these.paging
Module of FreePBX (Paging) :: Allows creation of paging groups to make announcements using the speaker built into most SIP phones. Also creates an Intercom feature code that can be used as a prefix to talk directly to one person, as well as optional feature codes to block/allow intercom calls to all users as well as blocking specific users or only allowing specific users.asterisk-cli
Module of FreePBX (Asterisk CLI) :: Provides an interface allowing you to run a command as if it was typed into Asterisk CLIucp
Module of FreePBX (User Control Panel) :: The user control panel is a way for users to control call handling and personal settings from a web browser.pbdirectory
restart
Module of FreePBX (Bulk Phone Restart) :: This module allows users to restart one or multiple phones that support being restarted via a SIP NOTIFY command through Asterisk's sip_notify.confsoundlang
Module of FreePBX (Sound Languages) :: Management of sound prompt languages.weakpasswords
Module of FreePBX (Weak Password Detection) :: This module detects weak SIP secrets and sets security notifications accordinglyspeeddial
presencestate
Module of FreePBX (Presence State) :: Manage list of presence states.bulkhandler
Module of FreePBX (Bulk Handler) ::queues
Module of FreePBX (Queues) :: Creates a queue where calls are placed on hold and answered on a first-in, first-out basis. Many options are available, including ring strategy for agents, caller announcements, max wait times, etc.manager
Module of FreePBX (Asterisk API) ::voicemail
Module of FreePBX (Voicemail) :: This module allows you to configure Voicemail for a user or extensionarimanager
Module of FreePBX (Asterisk REST Interface Users) :: Asterisk 12 introduces the Asterisk REST Interface (ARI), a set of RESTful API's for building Asterisk based applications. This module provides the ability to add and remove ARI users.conferences
Module of FreePBX (Conferences) :: Allow creation of conference rooms where multiple people can talk togetherdonotdisturb
Module of FreePBX (Do-Not-Disturb (DND)) :: Provides donotdisturb functionalitybackup
Module of FreePBX (Backup & Restore) :: Backup & Restore for your FreePBX environmentphonebook
Module of FreePBX (Phonebook) :: Provides a phonebook which can be used as base for Caller ID Lookup and Speed Dialdisa
Module of FreePBX (DISA) :: DISA Allows you 'Direct Inward System Access'. This gives you the ability to have an option on an IVR that gives you a dial tone, and you're able to dial out from the FreePBX machine as if you were connected to a standard extension. It appears as a Destination.findmefollow
Module of FreePBX (Follow Me) :: Much like a ring group, but works on individual extensions. When someone calls the extension, it can be setup to ring for a number of seconds before trying to ring other extensions and/or external numbers, or to ring all at once, or in other various 'hunt' configurations. Most commonly used to ring someone's cell phone if they don't answer their extension.callwaiting
Module of FreePBX (Call Waiting) :: Provides an option to turn on/off call waitingoutroutemsg
Module of FreePBX (Route Congestion Messages) :: Configures message or congestion tones played when all trunks are busy in a route. Allows different messages for Emergency Routes and Intra-Company Routestimeconditions
Module of FreePBX (Time Conditions) :: Creates a condition where calls will go to one of two destinations (eg, an extension, IVR, ring group..) based on the time and/or date. This can be used for example to ring a receptionist during the day, or go directly to an IVR at night.daynight
Module of FreePBX (daynight) :: Call Flow manual toggle control - allows for two destinations to be chosen and provides a feature code that toggles between the two destinations.ttsengines
Module of FreePBX (ttsengines) :: Allows you to configure text to speech enginesdigiumaddoninstaller
pm2
configedit
Module of FreePBX (Config Edit) :: Configuration file editor for _custom filesfreepbxlocalization
All po localization files included with FreePBX 2.11, plus new Russian and Japanese translationsdbmanager
Module of FreePBX (Filestore) :: This module manages database information for internal and external backups through the backup module.miscapps
Module of FreePBX (Misc Applications) :: Adds the ability to create feature codes that can go to any FreePBX destination (such as an IVR or queue)setcid
Module of FreePBX (Set CallerID) :: Adds the ability to change the CallerID within a call flow.dashboard
Module of FreePBX (System Dashboard) :: Provides a system information dashboard, showing information about Calls, CPU, Memory, Disks, Network, and processes.iaxsettings
Module of FreePBX (Asterisk IAX Settings) :: Use to configure Various Asterisk IAX Settings in the General section of iax.conf.callback
Module of FreePBX (Callback) ::infoservices
Provides a number of applications accessible by feature codes: company directory, call trace (last call information), echo test, speaking clock, and speak current extension number.vmblast
Module of FreePBX (Voicemail Blasting) :: Creates a group of extensions that calls a group of voicemail boxes and allows you to leave a message for them all at once.featurecodeadmin
Module of FreePBX (Feature Code Admin) ::cel
Module of FreePBX (Call Event Logging) :: Call Event Loggingasteriskinfo
Module of FreePBX (Asterisk Info) :: Provides a snapshot of the current Asterisk configurationamd
AMD Settingsuserman
Module of FreePBX (User Management) :: This Module manages all PBX users. It allows an Administrator to create a User Account that can be used by other applications for login or API purposes.blacklist
Module of FreePBX (Blacklist) :: This module is used to manage a system wide list of blocked callersdictate
Module of FreePBX (Dictation) :: This uses the app_dictate module of Asterisk to let users record dictate into their phones. When complete, the dictations can be emailed to an email address specified in the extension page.extensionsettings
Module of FreePBX (Extension Settings) :: Creates a list of all extensions and their current settings for CW, CF, CFB, CFU, VMXB and VMXUannouncement
Module of FreePBX (Announcements) :: Plays back one of the system recordings (optionally allowing the user to skip it) and then goes to another destination.printextensions
Module of FreePBX (Print Extensions) :: Creates a printable list of extension numbers used throughout the system from all modules that provide an internal callable numberringgroups
Module of FreePBX (Ring Groups) :: Creates a group of extensions that all ring together. Extensions can be rung all at once, or in various 'hunt' configurations. Additionally, external numbers are supported, and there is a call confirmation option where the callee has to confirm if they actually want to take the call before the caller is transferred.Love Open Source and this site? Check out how you can help us