This projects contains Jackson extension component for reading and writing XML encoded data.
Further, the goal is to emulate how JAXB data-binding works
with "Code-first" approach (no support is added for "Schema-first" approach).
Support for JAXB annotations is provided by JAXB annotation module;
this module provides low-level abstractions (JsonParser
, JsonGenerator
, JsonFactory
) as well as small number of higher level
overrides needed to make data-binding work.
It is worth noting, however, that the goal is NOT to be full JAXB clone; or to be a general purpose XML toolkit.
Specifically:
- While XML serialization should ideally be similar to JAXB output, deviations are not automatically considered flaws (there are reasons for some differences)
- What should be guaranteed is that any XML written using this module must be readable using module as well ("read what I wrote"): that is, we do aim for full round-trip support
- From above: there are XML constructs that module will not be able to handle; including some cases JAXB (and other Java XML libraries) supports
- This module also support constructs and use cases JAXB does not handle: specifically, rich type and object id support of Jackson are supported.
Type | Status |
---|---|
Build (CI) | |
Artifact | |
OSS Sponsorship | |
Javadocs | |
Code coverage (2.15) | |
OpenSSF Score | |
Fuzzing |
master
branch is for developing the next major Jackson version -- 3.0 -- but there
are active maintenance branches in which much of development happens:
2.16
is for developing the next minor 2.x version2.15
is for backported fixes to include in 2.15.x patch versions2.14
is for backported fixes to include in 2.14.x patch versions2.13
is for backported fixes to include in 2.13.x patch versions
Older branches are usually not changed but are available for historic reasons.
All released versions have matching git tags (jackson-dataformats-text-2.9.4
).
All modules are licensed under Apache License 2.0.
To use Jackson 2.x compatible version of this extension on Maven-based projects, use following dependency:
Maven:
<dependency>
<groupId>com.fasterxml.jackson.dataformat</groupId>
<artifactId>jackson-dataformat-xml</artifactId>
<version>2.15.0</version>
</dependency>
Gradle:
dependencies {
implementation 'com.fasterxml.jackson.dataformat:jackson-dataformat-xml:2.15.0'
}
(or whatever version is most up-to-date at the moment)
Also: you usually also want to make sure that XML library in use is Woodstox since it is not only faster than Stax implementation JDK provides, but also works better and avoids some known issues like adding unnecessary namespace prefixes.
You can do this by adding this in your pom.xml
:
Maven:
<dependency>
<groupId>com.fasterxml.woodstox</groupId>
<artifactId>woodstox-core</artifactId>
<version>6.5.0</version>
</dependency>
Gradle:
dependencies {
implementation 'com.fasterxml.woodstox:woodstox-core:6.5.0'
}
Although module implements low-level (JsonFactory
/ JsonParser
/ JsonGenerator
) abstractions,
most usage is through data-binding level. This because a small number of work-arounds have been added
at data-binding level, to work around XML peculiarities: that is, stream of JsonToken
s that parser
produces has idiosyncracies that need special handling.
Usually you either create XmlMapper
simply by:
XmlMapper mapper = new XmlMapper();
but in case you need to configure settings, you will want to use Builder (added in Jackson 2.10) style construction:
XmlMapper mapper = XmlMapper.builder()
.defaultUseWrapper(false)
// enable/disable Features, change AnnotationIntrospector
.build();
Alternatively, sometimes you may want/need to configure low-level XML processing details
controlled by underlying Stax library (Woodstox, Aalto or JDK-default Oracle implementation).
If so, you will need to construct XmlMapper
with properly configured underlying factories.
This usually looks something like:
XMLInputFactory ifactory = new WstxInputFactory(); // Woodstox XMLInputFactory impl
ifactory.setProperty(WstxInputProperties.P_MAX_ATTRIBUTE_SIZE, 32000);
// configure
XMLOutputFactory ofactory = new WstxOutputFactory(); // Woodstox XMLOutputfactory impl
ofactory.setProperty(WstxOutputProperties.P_OUTPUT_CDATA_AS_TEXT, true);
XmlFactory xf = XmlFactory.builder()
.xmlInputFactory(ifactory) // note: in 2.12 and before "inputFactory()"
.xmlOutputFactory(ofactory) // note: in 2.12 and before "outputFactory()"
.builder();
XmlMapper mapper = new XmlMapper(xf); // there are other overloads too
For configurable properties, you may want to check out Configuring Woodstox XML parser
As the well as the Woodstox properties specified above, you can also call WstxInputFactory#getConfig() and modify the ReaderConfig. One useful setting is the maxElementDepth.
Usage of this library on Android is currently not supported. This is due to the fact that the Stax API is unavailable on the Android platform, and attempts to declare an explicit dependency on the Stax API library will result in errors at build time (since the inclusion of the javax.*
namespace in apps is restricted).
For more on the issues, see:
- https://stackoverflow.com/questions/31360025/using-jackson-dataformat-xml-on-android
- https://www.docx4java.org/blog/2012/05/jaxb-can-be-made-to-run-on-android/
Note that as per articles linked to it MAY be possible to use the module on Android, but it unfortunately requires various work-arounds and development team can not do much to alleviate these issues. Suggestions for improvements would be welcome; discussions on Jackson users list encouraged.
Serialization is done very similar to JSON serialization: all that needs to change is ObjectMapper
instance to use:
// Important: create XmlMapper; it will use proper factories, workarounds
ObjectMapper xmlMapper = new XmlMapper();
String xml = xmlMapper.writeValueAsString(new Simple());
// or
xmlMapper.writeValue(new File("/tmp/stuff.xml"), new Simple());
and with POJO like:
public class Simple {
public int x = 1;
public int y = 2;
}
you would get something like:
<Simple>
<x>1</x>
<y>2</y>
</Simple>
(except that by default output is not indented: you can enabled indentation using standard Jackson mechanisms)
Similar to serialization, deserialization is not very different from JSON deserialization:
ObjectMapper xmlMapper = new XmlMapper();
Simple value = xmlMapper.readValue("<Simple><x>1</x><y>2</y></Simple>", Simple.class);
It is also possible to do incremental writes. This is done by creating Stax
XMLInputFactory
separately (similar to how with JSON you would create JsonGenerator
), and then:
// First create Stax components we need
XMLInputFactory xmlInputFactory = XMLInputFactory.newFactory();
XMLOutputFactory xmlOutputFactory = XMLOutputFactory.newFactory();
StringWriter out = new StringWriter();
XMLStreamWriter sw = xmlOutputFactory.createXMLStreamWriter(out);
// then Jackson components
XmlMapper mapper = new XmlMapper(xmlInputFactory);
sw.writeStartDocument();
sw.writeStartElement("root");
// Write whatever content POJOs...
SomePojo value1 = ...;
OtherPojo value2 = ...;
mapper.writeValue(sw, value1);
mapper.writeValue(sw, value2);
// and/or regular Stax output
sw.writeComment("Some insightful commentary here");
sw.writeEndElement();
sw.writeEndDocument();
Similarly it is possible to read content, sub-tree by sub-tree; assuming similar XML content we would use
XMLInputFactory f = XMLInputFactory.newFactory();
File inputFile = ...;
XMLStreamReader sr = f.createXMLStreamReader(new FileInputStream(inputFile));
XmlMapper mapper = new XmlMapper();
sr.next(); // to point to <root>
sr.next(); // to point to root-element under root
SomePojo value1 = mapper.readValue(sr, SomePojo.class);
// sr now points to matching END_ELEMENT, so move forward
sr.next(); // should verify it's either closing root or new start, left as exercise
OtherPojo value = mapper.readValue(sr, OtherPojo.class);
// and more, as needed, then
sr.close();
In addition to standard Jackson annotations and optional JAXB (javax.xml.bind.annotation
), this project also adds couple of its own annotations for convenience, to support XML-specific details:
@JacksonXmlElementWrapper
allows specifying XML element to use for wrappingList
andMap
properties@JacksonXmlProperty
allows specifying XML namespace and local name for a property; as well as whether property is to be written as an XML element or attribute.@JacksonXmlRootElement
allows specifying XML element to use for wrapping the root element (default uses 'simple name' of the value class)@JacksonXmlText
allows specifying that value of one property is to be serialized as "unwrapped" text, and not in an element.@JacksonXmlCData
allows specifying that the value of a property is to be serialized within a CData tag.
for longer description, check out XML module annotations.
Currently, following limitations exist beyond general Jackson (JSON) limitations:
- Streaming model is only meant to be used through databinding: direct usage is possible but not supported
- Tree Model (
JsonNode
,ObjectMapper.readTree()
) is based on JSON content model and it does not match exactly with XML infoset- Mixed content (both textual content and elements as children of an element) not supported: text, if any, will be lost
- Prior to
2.12
, handling of repeated XML elements was problematic (it could only retain the last element read), but #403 improves handling
- Root value should be a POJO (that is, a Java value expressed as a set of properties (key/value pairs)); and specifically following types can be serialized as properties but may not work as intended as root values
- Primitive/Wrapper values (like
java.lang.Integer
) String
s (and types that serialize as Strings such as Timestamps, Date/Time values)Enum
s- Java arrays
java.util.Collection
values (Lists, Sets)- Note: over time some level of support has been added, and
Collection
s, for example, often work.
- Primitive/Wrapper values (like
- Lists and arrays are "wrapped" by default, when using Jackson annotations, but unwrapped when using JAXB annotations (if supported, see below)
@JacksonXmlElementWrapper.useWrapping
can be set to 'false' to disable wrappingJacksonXmlModule.setDefaultUseWrapper()
can be used to specify whether "wrapped" or "unwrapped" setting is the default
- Polymorphic Type Handling works, but only some of inclusion mechanisms are supported (
WRAPPER_ARRAY
, for example is not supported due to problems wrt mapping of XML, Arrays)- JAXB-style "compact" Type Id where property name is replaced with Type Id is not supported.
- Mixed Content (elements and text in same element) is not supported in databinding: child content must be either text OR element(s) (attributes are fine)
- While XML namespaces are recognized, and produced on serialization, namespace URIs are NOT verified when deserializing: only local names are matched
- This also means that elements that only differ by namespace cannot be used.
- Root name wrapping support is incomplete (
SerializationFeature.WRAP_ROOT_VALUE
/DeserializationFeature.UNWRAP_ROOT_VALUE
, so that:- Serialization DOES NOT add wrapping (at least up to and including 2.13)
- Deserialization DOES unwrap root element (except for Jackson 2.12.x that temporarily removed support altogether -- fixed in 2.13.0)
Jackson components are supported by the Jackson community through mailing lists, Gitter forum, Github issues. See Participation, Contributing for full details.
Available as part of the Tidelift Subscription.
The maintainers of jackson-dataformat-xml
and thousands of other packages are working with Tidelift to deliver commercial support and maintenance for the open source dependencies you use to build your applications. Save time, reduce risk, and improve code health, while paying the maintainers of the exact dependencies you use. Learn more.
- XML module wiki page for more information
- Using XML with DropWizard? Check out this extension!