Ansuel/tch-nginx-gui

This is a highly modified and universal version of the GUI installed on all Technicolor Modem/Routers compatibile with (and probably not only):

• DGA4132 / VBNT-S
• DGA4131 / VBNT-O
• DGA4130 / VBNT-K
• TG589vac / VANT-E
• TG788vn v2 / VDNT-W
• TG789vac v2 HP / VBNT-L
• TG789vac v2 / VANT-6
• TG789vac (v1) / VANT-D
• TG789vac XTREAM 35B / VBNT-F
• TG799vac / VANT-F
• TG799vac XTREAM / VBNT-H
• TG800vac / VANT-Y

• Quick glance statistics page
• DLNA Fully working
• Visualise CPU load
• Show VoIP Password directly on the GUI
• Upgrade/Downgrade firmware from the GUI
• Export and Save modem configuration from the GUI
• Ability to select two channels for the update (DEV or Stable)
• Eco settings for the CPU and LEDs
• Easy set up for Bridge or Voice Mode
• Ability to revert from brige/voice to normal without factory reset
• Traffic monitoring with Interactive Charts
• Fast Cache Options
• DoS Protect Options
• Improved Traffic Graph
• Dosens of xDSL Stats
• Ability to Select many compatable xDSL drivers
• Ability to install LuCI GUI or sharing service like transmission
• Spoofing of firmware version to bypass CWMP controls
• Select many skins for the GUI, like the Fritz!Box one
• Install extensions like: Telstra Basic GUI, LuCI, Transmission, Aria2
• And many others...

You can help the development of this GUI by reporting issues or suggesting improvements.
All the infomation can be found here and on the ilpuntotecnico forum (https://www.ilpuntotecnico.com/forum) (To write on this forum you need to write in the presentation section after the first login).

Basic installation instructions for the latest Stable release:

First you need to get root access to your Gateway

• DGA4130 TIM: https://www.ilpuntotecnico.com/forum/index.php/topic,77325.html
• DGA4132 TIM: https://www.ilpuntotecnico.com/forum/index.php/topic,78162.html
• 789vac v2 TIM: https://www.ilpuntotecnico.com/forum/index.php/topic,77981.0.html
• 789vac v2 Tiscali: https://www.ilpuntotecnico.com/forum/index.php/topic,77988.html
• 789vac v1/2/3, 799vac, 800vac and 797n v3 Any ISP: https://hack-technicolor.rtfd.io

Then execute these commands (Active WAN/Internet connection required):

curl -k https://raw.githubusercontent.com/Ansuel/gui-dev-build-auto/master/GUI.tar.bz2 --output /tmp/GUI.tar.bz2
bzcat /tmp/GUI.tar.bz2 | tar -C / -xvf -
/etc/init.d/rootdevice force

You can find all of the autobuilt GUI versions at this link: https://github.com/Ansuel/gui-dev-build-auto

If you get an error during the download process or you have no Internet/WAN connection on the device, just manually download the GUI.tar.bz2 file and put in /tmp folder via SCP then execute the other (non curl) commands listed above.

If you find a bug, please report it using GitHub's Issue feature making sure you attach a photo and the log (Run: logread). If you upload config files, please remove your personal details including your public IP and MAC. In the future there will be a button/command in the GUI to generate a debug file.

Stats:

Cards:

Donation

If you want to donate to the developer of this modified gui use the button below