ESP32-Serial-Bridge

Transparent WiFi (TCP) to all three UART Bridge, supports both AP and STATION WiFi modes. The .ino file is the code for the ESP32. Use Arduino IDE for ESP32 to compile and upload it to the ESP32. I made this project in order to connect Flight equipment devices devices like (Radio, Vario FLARM), to a Flight Computer (Kobo, Smartphones etc.), but it is not limited to that. You can use it wherever you want, but on your own risk. Read license file for more details. Accesspoint
IPAdress: 192.168.4.1
AP SSID: LK8000
AP Password: Flightcomputer
Used Ports:
192.168.4.1:8880 <-> COM0
192.168.4.1:8881 <-> COM1
192.168.4.1:8882 <-> COM2

===============================================================

Used Libraries: (must be installed in the arduino IDE):

https://github.com/espressif/arduino-esp32

===============================================================

In some cases the memorylayout is to small for this scetch. If you face this problem you can either disable Bluetooth by removing #define BLUETOOTH in config.h or change the partition size as described here: https://desire.giesecke.tk/index.php/2018/04/20/change-partition-size-arduino-ide/

Arduino hardware configuration:

https://github.com/AlphaLima/ESP32-Serial-Bridge/blob/master/Settings.jpg

===============================================================

example usecases:

https://www.youtube.com/watch?v=K2Hia06IMtk

https://www.youtube.com/watch?v=GoSxlQvuAhg

Hardware

here is the wiring diagram recomendation: https://raw.githubusercontent.com/AlphaLima/ESP32-Serial-Bridge/master/ESP32-SerialBridge.jpg
Pinning
COM0 Rx <-> GPIO21
COM0 Tx <-> GPIO01
COM1 Rx <-> GPIO16
COM1 Tx <-> GPIO17
COM2 Rx <-> GPIO15
COM2 Tx <-> GPIO04

NOTE: The PIN assignment has changed and may not look straigt forward (other PINs are marked as Rx/Tx), but this assignment allows to flash via USB also with hooked MAX3232 serial drivers.

I recomend to start your project with a Node32s or compatible evaluation board. For a TTL to RS232 level conversion search google for "TTL RS3232 Converter"

https://tech.scargill.net/wp-content/uploads/2017/05/ESP326.jpg