32blit SDK
This is the software developer kit for 32blit. It includes the 32blit game engine, plus tooling and instructions to compile your 32blit projects on Linux, Windows and macOS.
Finished 32blit games can be released simultaneously for Linux, Windows, macOS and the 32blit using the GitHub actions in the 32blit boilerplate - https://github.com/32blit/32blit-boilerplate/
You Will Need
Some experience writing/compiling C/C++ software is required.
OS specific docs, these cover setup and command-line builds:
If you want to run in a browser, refer to the Emscripten docs
If you want to run on device, refer to the 32blit docs
How to set up your editor:
Overview of what is inside?
32blit
The 32blit directory contains the API/engine for developing your game. This engine contains all the graphics, sound and game logic functionality you'll need for building a 32blit game.
32blit-sdl
The 32blit-sdl directory contains an SDL2 HAL for 32blit compatible with Linux, macOS, Windows and Emscripten. You can use it to run your 32blit projects on your computer and test/debug them a little quicker.
You should be careful relying upon it, however, since 32blit-sdl is not an emulator you may run into memory or performance problems when deploying your game to a 32blit console.
32blit-stm32
The 32blit-stm32 directory contains the STM32 HAL for 32blit, compatible with the STM32H750. Once you're ready to get your project running on a 32blit console you will need to ensure you have the gcc-arm-none-eabi toolchain installed and then follow the instructions below for Building & Running On 32Blit
Examples / Projects
The examples directory contains example projects, these can be built into both SDL or STM32 binaries and cover a range of techniques from simple concepts to complete games.
Refer to the OS/platform specific documentation files in the docs/ folder for instructions on how to compile and run these examples.
To get started writing your own game, you should use the 32blit boilerplate - https://github.com/32blit/32blit-boilerplate/
Help & Support
Join the 32blit community on:
- Discord (Chat) - https://discord.gg/7qM9ftC
- Discourse (Forum) - https://forums.pimoroni.com/c/32blit/21
Troubleshooting
If you see cannot create target because another target with the same name already exists you've probably run cmake .. in the wrong directory (the project directory rather than the build directory), you should remove all but your project files and cmake .. again from the build directory.
If you are getting complaints on WSL / Linux about python modules missing, you may have accidentally installed them with sudo. When using pip3 to install modules do not use sudo, this will make sure that modules are installed for the current user.